Filter
Top Products
Fabric Watch
179Web Tools Version 3.1.x/4.1.x User Guide
The Fabric Watch > Threshold Configuration > Element Configuration fields
are described in Table 43.
The Fabric Watch > Threshold Configuration > Configuration Report fields
are described in Table 44.
Table 43: Threshold Configuration Element Configuration Field Descriptions
Field Description
Select Area Use the drop-down menu to select the specific area to
configure, such as E-Ports. The items that appear in this menu
will vary depending on the item selected in the Navigation
tree.
Select Element Use the drop-down menu to chose the element to configure,
such as a fabric.
Status
Enable Select the radio button to enable alarms.
Disable Select the radio button to disable alarms.
Behavior Type
Triggered Select the Triggered Behavior mode if you want Fabric Watch
to register an event when a variable exceeds a threshold. An
event will not be triggered again until the variable falls and
exceeds the threshold again.
Continuous Select Continuous mode if you want Fabric Watch to register
an event when a variable exceeds a threshold and continue
to register an event for every time interval.
Time Interval (in
secs)
Select the amount of time (in seconds) that you want Fabric
Watch to poll for a new event.
Table 44: Threshold Configuration Report Field Descriptions
Field Description
Configuration for
Class
Describes the class that is being reported. The item selected in
the Navigation tree appears here.
Begin Area Describes the current settings configured for the selected
area. See Table 43.
Begin Element Describes the current settings configured for the selected
area.
Changed Displays thresholds that have changed.
Exceeded Displays thresholds that have been exceeded.