Filter
Top Products
Troubleshooting Web Tools
264 Web Tools Version 3.1.x/4.1.x User Guide
Web Tools Limitations
This section provides information on limitations of Web Tools.
Core Switch 2/64 in Web Tools
Listed below are the known limitations in Web Tools, relating to the Core Switch
2/64:
■ For the Core Switch 2/64 neither CP is updated in the “Switch View” when
switch 0 is being rebooted. The CP data displayed on this “Switch View” is
dependent on Switch 0, and that data is not available when Switch 0 is
rebooting.
Workaround: Refresh or relaunch Switch View after either switch is
rebooted.
■ Rarely during a failover event, independent Web Tools clients operating on
different machines may see slight differences in the management of those
Core Switch 2/64 switches participating in the failover event.
Workaround: There is no workaround.
■ Under some circumstances where the 1 Gb SAN or 2 Gb SAN switches may
be experiencing high memory usage, the Core Switch 2/64 Fabric View will
display a fixed gray background area that says “Loading Java Applet....” This
may also occur when a switch leaves the fabric simultaneous with a network
problem. The period of loss of network connectivity for Web Tools is varied
for different configurations.
Workaround: Ensure that any 1 Gb SAN or 2 Gb SAN switches are
upgraded with the recommended code versions to work optimally with the
Core Switch 2/64 switches.
■ Occasionally, other switches that are not Core Switch 2/64 switches may
display the port ICONs correctly, but, be missing one or more control button
icons.
Workaround: Close the Switch View of the 1 Gb SAN or 2 Gb SAN switch
and reopen it.
Zoning in Web Tools
Listed below are the known limitations in Web Tools, relating to zoning.