Filter
Top Products
Switch Admin Window
123Web Tools Version 3.1.x/4.1.x User Guide
Virtual Channels
The switch allows fine tuning for a specific application by configuring the
parameters for eight virtual channels.
The default values are set for optimal performance. Changing the default settings
may improve performance, but may also degrade performance. The default Virtual
Channel values are as follows:
Suppress Class F
Traffic
Apply only if VC Encoded Address Mode is also set. When
checked, translative addressing (which allows private devices
to communicate with public devices) is disabled.
Always Send RCSN Check this box to issue a Remote State Change notification;
following the completion of loop initialization, FL_Ports detect
the presence of new devices or the absence of preexisting
devices.
Do Not Allow
ALPA_0x00
Check box to specify that AL_PA value 0x00 is not allowed.
Table 24: Configure (Fabric) Field Descriptions (Continued)
Field Descriptions
Table 25: VC Parameters Default Settings
Field Default Possible Range
VC Priority 2 2 2 to 3
VC Priority 3 2 2 to 3
VC Priority 4 2 2 to 3
VC Priority 5 2 2 to 3
VC Priority 6 3 2 to 3
VC Priority 7 3 2 to 3