Filter
Top Products
Aireo User Guide
from the SoniqSync Host for more information on adding a
wireless network with DHCP disabled to your player.)
5. Select a network and press the Play/Select button to view DHCP settings
associated with the selected network. The following information appears in read
only format:
• The current DHCP status (Enabled/Disabled)
• The network IP address
• The network Subnet Mask
6. Press any button to leave this view.
Deleting Networks
You can remove a network association from your Aireo player:
1. From your Aireo player, press the Mode button until you see SoniqSync on
the display screen and release the MODE button.
2. Select SETUP and press the Play/Select button.
3. Select Network Setup and press the Play/Select button.
4. Select Delete Networks and press the Play/Select button.
5. Select a network and press the Play/Select button.
6. Use the < RIGHT or LEFT > buttons to change confirm the request:
• YES – Indicates Aireo will delete the network association.
• NO – Indicates Aireo will cancel the request to delete the network
association.
7. Press the Play/Select button to delete the network.
Note: Deleting a network on Aireo cannot be undone. However, you can re-add
the network to your player automatically by connecting to the network again.
Testing Network
You can verify the WiFi signal strength for network association to your Aireo player on
the Test Network view:
1. From your Aireo player, press the Mode button until you see
SoniqSync on
the display screen and release the MODE button.
2. Select SETUP and press the Play/Select button.
3. Select Network Setup and press the Play/Select button.
4. Select Test Network and press the Play/Select button. Aireo scans for networks
and displays the available networks.
5. Highlight the network association you want to test and press the Play/Select
button. Aireo connects to the network and displays connection status and network
IP address. A status bar displays the current WiFi signal strength.
6. Press any button to cancel the test.
55