Filter
Top Products
Aireo User Guide
3. Select DOCK and press the Play/Select button. Aireo scans for networks. When
it finds the network, you will see PC: <SoniqSyncHostName>, where
<SoniqSyncHostName> is the name of your SoniqSync Host (for example, PC:
GJAMES-D). You will also see On-Line displayed under Status in the
SoniqSync dialog on your PC.
Note that you can exit the wireless connection to your SoniqSync Host by
selecting STOP on your Aireo player. Aireo will ask for confirmation to
disconnect. Select YES to disconnect and press the Play/Select button. If you do
not want to disconnect, press the < Left or Right > button on the Aireo player
navigation keypad and select NO and press the Play/Select button.
• If there is no PC association with your Aireo player, then Aireo cannot
connect to a SoniqSync Host. Add a player association to Aireo by
following the directions in Adding a New Player through a Wireless
Connection for a wireless network.
• If the SoniqSync application is not active on the host PC you are trying to
connect with, a “Wireless Dock Failed – Unable to locate PC” message
appears on your player screen.
• Once connected to your PC host, your Aireo player displays the PC name,
network name and the wireless signal strength.
Note: The SoniqSync application installed on your host PC must be active to
receive your Aireo player connection.
Setting Up Aireo for a Network Connection
Introduction
The Setup menu manages associations on Aireo to a SoniqSync Host on a PC. You may
select from the following options on the Setup menu:
• PC Setup – Manage PC to player associations (PCs must have SoniqSync installed to
be associated).
• Network Setup – Manage network to player associations.
Note: You must have SoniqSync installed on your PC before you can associate a PC to
your Aireo player.
This section covers:
• Setting Up PC Associations
• Setting Up a Network Association
Related Topics
• Setting Up a Wireless Connection on Aireo
50