Filter
Top Products
Aireo User Guide
You may select from the following options on the Network Setup menu:
• List Network - Associate your Aireo player with a wireless network.
• Delete Network – Remove a network association from your Aireo player.
• Test Network – Measure the signal strength to a network your Aireo player can detect.
Note: You must have SoniqSync installed on your PC before you can associate a PC to
your Aireo player.
This section covers:
• Listing Networks
• Deleting Networks
• Testing Network
Listing Networks
List Networks displays a list of all network associated with your Aireo player. You may
also review setting details for each network.
To display a list of networks associated with Aireo:
1. From your Aireo player, press the Mode button until you see
SoniqSync on
the display screen and release the MODE button.
2. Select SETUP and press the Play/Select button.
3. Select Network Setup and press the Play/Select button.
4. Select List Networks and press the Play/Select button. List Networks displays
the following information:
• All Network associations
• Wired Equivalent Privacy (WEP) protocol
• On - Indicates that the network requires special configuration
adjustments to support WEP on a wireless network. (See Adding a
Wireless Network To Your Player from the SoniqSync Host for
more information on adding a wireless network with WEP enabled
to your player.)
• Off – Indicates that Aireo can connect to a wireless network that
does not have WEP enabled. (No additional adjustments are
required.)
• Dynamic Host Configuration Protocol (DHCP)
• On - Indicates that the network DHCP Server can provide an IP
address to Aireo when connecting to the network.
• Off - Indicates that the network does not provide an IP address.
Special configuration adjustments will be required to connect your
Aireo player. (See Adding a Wireless Network To Your Player
54