Filter
Top Products
Aireo User Guide
you have a Wi-Fi wireless network set up. You can have new content on your player
when you want it.
SoniqSync is a powerful application that will help you manage copies (downloads) that
you can send to your Aireo MP3 player. Basically, SoniqSync will help you decide
WHAT and WHEN you want to put new music and information content on your Aireo.
From the SoniqSync feature on Aireo, you can do the following:
• SYNC - Remove the clips from a selected playlist or mix that you listened to and
replaces them with new clips.
• DOCK – Make a wireless connection to the SoniqSync Host on your PC.
• SETUP – Manage PC and network associations. If you are connecting for the first
time, you need to set up your player to connect to a SoniqSync Host.
This section covers:
• Refreshing a Playlist on Aireo
• Making a Wireless Connection to SoniqSync
• Setting up Aireo for a Network Connection
Related Topics
• Setting Up a Wireless Connection on Aireo
• Connecting Your Player to a SoniqSync Host
Refreshing a Playlist on Aireo
You can refresh content on Aireo! SoniqSync removes the clips from a selected playlist
that you listened to and replaces them with new clips. This assumes that you selected
Swap clips that have been played since last sync as specified in the SoniqSync - Set
Rules dialog on the SoniqSync Host. See Setting Rules for a Mix in the SoniqSync
Online Help for more information.
Note that the SYNC feature on your Aireo player only works through a wireless
connection. If you do not have a wireless connection, you can connect Aireo to a
SoniqSync Host through a USB connection and use the Refresh Now feature in
SoniqSync - SoniqMix dialog or Refresh Music option from the menu when you right-
click the
SoniqSync icon in System Tray. The Refresh Now and Refresh Music is
also supported on a wireless connection. See Refreshing a Mix or Refreshing all Playlists
in the SoniqSync Online Help for more information.
1. Click the Mode button until you see
SoniqSync on the display screen and
release the MODE button.
2. Select PC and press the < Left or Right > button on the navigation keypad until
you see the name of the PC that you want to connect to (for example, PC:
GJAMES-D).
48