Filter
Top Products
50
RQT8346
Playing a video cassette
Refer to the control reference on page 48.
On-screen display below appears during play on VHS.
To see these displays, set “Status Messages” to “Automatic”. (l 76)
Press [STATUS].
Note
≥The on-screen display may be distorted depending on the
playback tape or the input signal.
≥Status messages appear while stopped or recording. (l 42)
Various on-screen display indications
1 Current drive
2 Audio indicators
The Left (Mono L) and Right (Mono R) indicators show
which sound mode is selected as follows:
Stereo: Stereo indicators appear.
Mono L: The Mono L indicator appears.
Mono R: The Mono R indicator appears.
Normal: Neither the L nor R indicator appears.
3 Operation status display
4 Shows the tape counter and remaining tape time
Pressing [STATUS] once makes the on-screen display
appear. After that, press the button repeatedly to change
the display as follows:
No display > Tape counter > Remaining tape time
^-----------------------------------------------------------------}
≥Press [¢, RESET] to reset the tape counter (elapsed
time) to “0:00.00”. The tape counter is automatically reset
to “0:00.00” when inserting a video cassette.
≥The remaining time is approximate. It will be incorrect if
you set the wrong tape time in “Select Tape Length” in the
“VHS” menu and if the tape is of poor quality. (l 77)
5 Cassette-in indicator
Shows whether you have inserted a video cassette.
6 Recording mode indicator (l 15, 28)
VHS
Mono L
0:00.22
1 SP 1
12 3 4
5
6
M6740P.book 50 ページ ２００６年１月３０日 月曜日 午後３時３０分