Filter
Top Products
27
RQT8346
Recording
Note about recording
The unit automatically selects a recording rate between XP and EP
(8H) that will enable the recordings to fit in the remaining disc space
with the best possible recording quality.
≥You can set FR (Flexible Recording) mode when copying (l 59,
60, 64) or programming scheduled recordings (l 36, To make
scheduled recording) or Flexible recording (l 30).
∫ Using “Flexible Recording” is convenient in
these kinds of situations.
[RAM] [-R] [-RW‹V›] [+R] [+RW]
≥When the amount of free space on the disc makes selecting an
appropriate recording mode difficult
≥When you want to record a long program with the best picture
quality
[HDD]
≥When you want to record a title to HDD so that it can then be
copied to fit one 4.7 GB disc perfectly.
You do not need to edit the recorded title, or change the recording
mode when copying, to fit the disc space.
[RAM] [-RW‹V›] [+R] [+R[DL] [+RW]
When you insert a new disc or a disc recorded on a computer or
other equipment, a format confirmation screen is displayed. Format
the disc to use it. However, all the recorded contents are deleted.
Press [2] to select “Yes” and then press [ENTER].
≥Several steps are necessary to format a disc. Refer to “Deleting all
the contents of a disc or card—Format” (l 71)
[-R] [-R[DL] [-RW‹V›] [+R] [+R[DL]
When you press [<, OPEN/CLOSE] on the main unit while stopped:
The following screen appears when you have not processed the disc
for play on other equipment.
∫ When finalizing the disc
Press [¥, REC] on the main unit.
≥You cannot stop this process once you have started it.
≥If you want to set the background, play menu select or providing a
disc name, select “Top Menu Style”, “Playback will start with:”
(l 72) or “Disc Name” (l 70) in “DVD Management” before
finalizing.
∫ When opening the tray without disc finalization
Press [
<
, OPEN/CLOSE]
on the main unit.
(When connecting to a TV using the Video or S-Video terminal)
From the power on state, recording starts about 1 second
¢
after
[
¥
, REC] is pressed. If [TV GUIDE] is pressed while the unit is off, the
Electronic Program Guide (EPG) starts being displayed in less than
1 second, with the full EPG being displayed in about 1.5 seconds.
¢ Only when recording to the HDD or DVD-RAM
HDD and discs
∫ FR (Flexile Recording)
e.g., Recording a 90 minutes program to disc
If you select XP mode, the program will not fit one disc.
4.7 GB
DVD-RAM
4.7 GB
DVD-RAM
4.7 GB
DVD-RAM
4.7 GB
DVD-RAM
If you select SP mode, the program will fit one disc.
If you select “Flexible Recording” the
program will fit one disc perfectly.
A second disc is necessary for
30 minutes of the program.
Another disc is necessary.
However there will be 30 minutes
remaining disc space.
∫ When the format confirmation screen is
displayed
∫ When remove a recorded disc
1 Sec. Quick Start for Recording & EPG Display
ENTER
This disc is not formatted properly.
Do you want to format the
disc in DVD Management?
Format
NoYe s
Finalizing is necessary to enable playback
of the disc on compatible DVD players.
Once finalized, titles cannot be added to the disc.
It will take approximately
±
minutes. Start ?
Make compatible for playback on other DVD players ( Finalize )
Press
”
REC
”
to start finalizing.
Press the OPEN/CLOSE button to postpone
finalizing. The disc can be played only on
this unit. You can Finalize it later.
STEP 4 Set up to match your television and the unit’s remote control/Note about recording
M6740P.book 27 ページ ２００６年１月３０日 月曜日 午後３時３０分