Filter
Top Products
49
RQT8346
The unit usually makes tracking adjustments, but you may need to
do it manually if noise appears on a tape recorded on other
equipment.
During play
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the noise disappears.
Adjust the vertical synchronization to stop the picture from jiggling
while paused.
This works only while VHS is paused during recording on the DVD.
While paused
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the jiggling stops.
∫ To return to auto tracking
Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]
simultaneously.
∫ To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note
≥This function may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical synchronization with
[CH, W, X] on the main unit
.
The unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
program quickly and easily.
Preparation
≥Insert a recorded video cassette. (l 12)
While stopped or during normal play
Press [:] or [9].
≥Each press increases the number of skips.
∫ To cancel the index search
Press [∫, STOP].
Note
≥Up to 20 index signals can be searched for in both directions.
≥If you press either one of the buttons too much, you can control the
number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the index signals are too
close together. Make recordings of at least 5 minutes.
While playing tapes
Press [AUDIO].
The audio changes as follows:
Stereo > Mono L > Mono R > No display (Normal audio track)
^------------------------------------------------------------}
When a stereo broadcast or SAP broadcast is recorded and played
back on the unit, stereo sound will be automatically selected in the
case of a stereo broadcast and SAP sound will be automatically
selected in the case of a dual-sound broadcast (Mono and SAP or
Stereo and SAP).
≥This function may not work properly if the program is played back
from a mid point. In a case like this, press [AUDIO] and select the
right sound.
≥The function will not work with a cassette which has been recorded
using external equipment.
It is also possible to play back tapes recorded in the S-VHS system.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is
capable of.
≥It is not possible to record in the S-VHS system with the unit.
Adjusting the playback picture
∫ Manual tracking
∫ Vertical locking adjustment
VHS Index Search System (VISS)
∫ Index signals are recorded in the following cases.
≥When a recording is started by pressing [¥, REC].
C
6 12
VHS cassette
Changing audio
Auto Bilingual Choice Function
S-VHS Quasi Playback (SQPB)
Playing backPlaying a video cassette
M6740P.book 49 ページ ２００６年１月３０日 月曜日 午後３時３０分