Filter
Top Products
Appendix
Appendix A-23
REPEAT MODE RETURN
Command: 0BBH
Function : Returns information for the “REPEAT
MODE SELECT”: 03BH.
DATA: 1
DATA1
000H: REPEAT OFF
001H: REPEAT ON
REQUEST command: 03BH
REC MODE RETURN
Command: 0BCH
Function : Return information for the “REC MODE
SELECT”: 03CH.
DATA: 1
DATA1
000H: STEREO REC
001H: MONORAL REC
REQUEST command: 03CH
KILL LOCAL MODE RETURN
Command: 0BDH
Function : Return information for the “KILL LOCAL
MODE SELECT”: 03DH.
DATA: 1
DATA1
000H: KILL ALMOST
001H: KILL ALL
REQUEST command: 03DH
SWITCH ENABLE RETURN (KILL
LOCAL function)
Command: 0CCH
Function : Returns information for the “SWITCH
ENABLE SELECT (KILL LOCAL function)”:
04CH.
DATA: 1
DATA1
000H: DISABLE
001H: ENABLE
REQUEST command: 04CH
MECHA STATUS RETURN
Command: 0D0H
Function : Returns information for the “MECHA
STATUS SENSE”: 050H.
DATA: 1
DATA1
bit7: REC bit (in RECORD mode)
bit6: TOC WRITING (writing TOC on disc)
bit5: CUE bit (during fast forward scan)
bit4: STOP bit (in STOP mode)
bit3: REVERSE bit (during fast rewind scan)
001H: PLAY
010H: PAUSE ON
012H: STOP
013H: EJECT
014H: DISC OUT (disc has been ejected)
023H: CUE (during fast forward scan)
02BH: CUE (during fast rewind scan)
052H: TOC WRITING
080H: REC STANDBY, REC PAUSE
Note
Each “bitX” listed above expresses the DATA
definition listed under “bitX” in binary notation.
Therefore, the commands actually returned are
the DATA only such as “001H” and “023H”.
REQUEST command: 050H
TRACK No. STATUS RETURN
Command: 0D5H
Function : Returns information for the “TRACK No.
STATUS SENSE”: 055H.
DATA: 3
DATA1 bit0: EOM STATUS
DATA2 (10, 1) {*001 to 255, decimal number}
DATA3 (**, 100)
REQUEST command: 055H
DISC STATUS RETURN
Command: 0D6H
Function : Returns information for the “DISC
STATUS SENSE”: 056H.
DATA: 1
bit4: REC PROTECT (record protect status)
bit3: PRE RECORDED DISC (a premastered
disc is loaded)
bit0: DISC PRESENT (a disc is loaded)
REQUEST command: 056H