Filter
Top Products
6-1 Overview of Editing Functions
Chapter 7 Setup Menu
7-4 Chapter 7 Setup Menu
You can set how to resume playback when you press
the PLAY/PAUSE button after the deck was stopped
with the STOP button being pressed.
Note
When you use the shuffle play or Multi-Access
function, the playback resume mode setting will be
ignored.
To set the playback resume mode
1 Press the EDIT/NO button while holding down the
STOP button.
The Setup menu appears.
2 Turn the AMS control until the menu item F11
(“Resume off”, “Resume Play” or “Resume Next”)
appears.
3 Press the AMS control.
The indication flashes to show that you can change
the setting.
4 Turn the AMS control to select the playback
resume mode from the values below.
Resume off: Turns the playback resume mode off.
Resume Play: Pressing the PLAY/PAUSE button
starts playback from where you stopped or
paused playback.
Resume Next: Pressing the PLAY/PAUSE button
starts playback from the beginning of the next
track which follows the one you stopped
playback.
5 Press the AMS control to affect the selection and
exit from the Setup menu.
7-4 Setting the Playback Resume Mode
1 2 – 5
p(P
0)
=+
r
Resume off
F11