Filter
Top Products
5-8 Starting Playback Instantly (Multi-Access Function)
Chapter 5 Playback
5-8 Chapter 5 Playback
Use the Program Play function to specify the playback
sequence of multiple tracks.
• To turn the Program Play function on, use the Setup
menu.
• To program tracks, use the Edit menu.
You can specify the playback sequence of up to 25
tracks. Program data may also be recorded to the TOC
on the disc.
When either AUTO PAUSE or AUTO CUE is
activated during Program Play
The MD deck enters playback pause at the beginning
of each track in the program (or when the audio signal
rises).
To select Program Play mode
1 Press the EDIT/NO button while holding down the
STOP button.
The Setup menu appears in the display.
2 Turn the AMS control until menu item F02
(“Continue”, “Shuffle”, “Program”, or “Multi
Access”) appears.
3 Press the AMS control.
The indication flashes to show that you can change
the setting.
4 Turn the AMS control clockwise to display
“Program,” then press the AMS control.
“PROGRAM” lights up in the display.
Turning the AMS control clockwise displays
“Continue”, “Shuffle”, “Program”, and “Multi
Access” in sequence. Turning the control
counterclockwise displays the same items in
reverse sequence.
5 Press the EDIT/NO button to exit from the Setup
menu.
After making a program, press the PLAY/PAUSE
button to start playing the program.
To play an entire program repeatedly
Select “F02:Program” and “F03:Repeat On” in the
Setup menu. The programmed selections will play
back repeatedly.
5-6 Program Play
1
5
2,3,4
p(P
0)
=+
r
Continue
F02
Program
F02
“PROGRAM” indication