Filter
Top Products
Appendix
Appendix A-19
00CH: 97 to 100 characters from the
beginning
0CCH: Erases the disc title.
DATA2: The first character set in DATA1
DATA3: The second character set in DATA1
DATA4: The third character set in DATA1
DATA5: The fourth character set in DATA1
DATA6: The fifth character set in DATA1
DATA7: The sixth character set in DATA1
DATA8: The seventh character set in DATA1
DATA9: The eighth character set in DATA1
Notes
• When you want to input a disc title fewer than
8 characters, decrease the number of DATA as
required. For example, if you want enter
“ABC”, set the number of DATA to four and
make each DATA as follows:
DATA1: 000H
DATA2: A
DATA3: B
DATA4: C
As the character part is ASCII data, the actual
data sent is as follows:
00AH 037H 036H 037H 030H 030H 041H 042H 043H
Line
Feed
N=7
“067H”
ABC
00DH
Carridge
Return
“00H”
• DATA1=0CCH erases the disc title and will
not be accepted during recording.
TRACK NAME IN
Command: 069H
Function : Enters track title.
DATA: 2 to 9
DATA1
000H: 1 to 8 characters from the beginning
001H: 9 to 16 characters from the beginning
002H: 17 to 24 characters from the beginning
::
::
009H: 73 to 80 characters from the beginning
00AH: 81 to 88 characters from the
beginning
00BH: 89 to 96 characters from the
beginning
00CH: 97 to 100 characters from the
beginning
0CCH: Erases a track title.
0AAH: Erases all titles (of both tracks and
disc) on the disc.
DATA2: The first character set in DATA1
DATA3: The second character set in DATA1
DATA4: The third character set in DATA1
DATA5: The fourth character set in DATA1
DATA6: The fifth character set in DATA1
DATA7: The sixth character set in DATA1
DATA8: The seventh character set in DATA1
DATA9: The eighth character set in DATA1
Notes
• When you want to input a track title fewer
than 8 characters, decrease the number of
DATA as required. For example, if you want
enter “ABC”, set the number of DATA to four
and make each DATA as follows:
DATA1: 000H
DATA2: A
DATA3: B
DATA4: C
As the character part is ASCII data, the actual
data sent is as follows:
00AH 037H 036H 039H 030H 030H 041H 042H 043H
Line
Feed
N=7
“069H”
ABC
00DH
Carridge
Return
“00H”
• During playback, pause, recording, or AMS
status, a track name will be entered to the
currently played or selected track.
• While the MD deck is stopped, a track name
will be entered to the track specified with the
command 023H (Track No. LOCATE POINT
PRESET). The command 023H have to be
issued before entering a track title.
• DATA1=0CCH erases a track title and will
not be accepted during recording.
• DATA1=0AAH erases all the track and disc
titles on the disc and will not be accepted
during recording.
ERROR SENSE REQUEST
Command: 070H
Function : The deck outputs this information to
indicate that an error (failure or trouble)
occurred within the deck.
If this information is output, the controller
should issue the “ERROR SENSE”: 078H
command to sense its contents.
DATA: None
RETURN command: 078H