Filter
Top Products
Chapter 7 Setup Menu
Chapter 7 Setup Menu 7-3
Use the Setup menu to use the timer-activated
recording or playback function connecting the MDS-
B5 to the timer.
Connecting a timer
To set the timer-activated function
1 Press the EDIT/NO button while holding down the
STOP button.
The Setup menu appears.
2 Turn the AMS control until the menu item F10
(“Timer off”, “Timer Play” or “Timer Rec”)
appears.
3 Press the AMS control.
The indication flashes to show that you can change
the setting.
4 Turn the AMS control to select the timer-activated
mode from the values below.
Timer off: Timer-activated function is disabled.
Timer Play: Timer-activated playback is set.
Timer Rec: Timer-activated recording is set.
5 Press the AMS control to affect the selection and
exit from the Setup menu.
Notes
• After a head- or end-trimming operation, be sure to
update the TOC before performing timer-activated
playback.
• In the case of premastered discs, head- or end-
trimming will not take place during timer-activated
playback. You should thus divide the tracks to
specify the start and end of playback.
7-3 Setting Up for Timer-Activated Function
To an AC outlet
p(P
0)
=+
r
Timer
MDS-B5
1 2 – 5
p(P
0)
=+
r
Timer off
F10