Filter
Top Products
6-1 Overview of Editing Functions
Chapter 6 Editing Functions
6-2 Chapter 6 Editing Functions
6-1-3 Track Numbers After
Editing Operations
If an editing operation results in the deletion or
addition of one or more tracks, the MD deck will
automatically renumber the affected tracks to reflect
that change. For example, if you erase track No. 2, all
succeeding tracks will be renumbered, starting with
track No. 3 (which becomes track No. 2).
If you do successive track erasures and relocations, it
is recommended that you monitor the results of each
operation by watching the titles and track numbers in
the display and through Rehearsal playback in order to
prevent editing errors.
6-1-4 Editing Operations During
Rehearsal Playback
Pressing the REHEARSAL button during playback
starts Rehearsal playback from that point.
After locating the part to be edited, press the EDIT/NO
button to do select the editing function.
You can do the following editing functions during
Rehearsal playback.
• (005) Divide ? — Dividing tracks
• (008-01) CP In ? — Recording cue points
• (009-01) HT In ? — Trimming of the starting portion
of a track
• (010-01) ET In ? — Trimming of the ending portion
of a track
6-1-5 Undo Function
If you make a mistake in erasing or moving a track, the
Undo function allows you to cancel the results of the
last operation.
Note
You cannot cancel the last operation after the MD deck
wrote the TOC data onto the disc.
To undo the last editing operation
1 Press the EDIT/NO button.
The Edit menu appears.
2 Turn the AMS control until “007:Undo ?” appears.
This does not appear if the last operation was not
an editing operation.
3 Press the AMS control.
A message will appear asking whether you want to
cancel the last operation or not. For example,
“Erase Undo ?” appears if the last operation was an
erasure of a track.
4 Press the AMS control.
After “Complete!!” (i.e., the undoing of the last
operation) appears, and the MD deck exits from
the Edit menu.
REHEARSAL button
p(P
0)
=+
r
1
2,3,4
p(P
0)
=+
r
Undo ?
007
EDIT/NO button