Filter
Top Products
5-8 Starting Playback Instantly (Multi-Access Function)
Chapter 5 Playback
5-4 Chapter 5 Playback
5-3-1 Locating a Specific Track
You can access specific tracks instantly by entering
their track numbers with the numeric buttons on the
remote controller or a keyboard.
If AUTO PAUSE and AUTO CUE are off, the MD
deck begins playback immediately after locating the
specified track.
If either AUTO PAUSE or AUTO CUE is selected, the
MD deck changes to playback pause after cueing to the
beginning of the specified track.
To specify track numbers greater than 10
Press the > button, then press the respective numeric
buttons.
Example:
To locate the 15th track, press the > button once, then
press 1 and 5.
To locate the 115th track, press the > button twice,
then press 1, 1, and 5.
Locating a specific track from the front
panel
To locate a specific track, turn the AMS control to
display the track number while the MD deck is
stopped. To start playback or to locate the beginning
of the specified track, press the PLAY/PAUSE button.
5-3-2 Locating the Beginning of a
Track (AMS)
During playback or playback pause, turn the AMS
(Automatic Music Sensor) control to quickly skip to
any track before or after the current one.
Turn the AMS control clockwise to go to a higher
track number, or turn it counterclockwise to go to a
lower track number.
If AUTO PAUSE and AUTO CUE are off, the MD
deck locates the beginning of the specified track and
starts playback.
If either AUTO PAUSE or AUTO CUE is on, the MD
deck locates the beginning of the specified track and
enters playback pause.
Locating a specific track using the remote
controller
You can use the remote controller or the keyboard to
locate the beginning of a track. To do this, press the
= or + button during playback or playback
pause.
Each press of the + (or =) button increases
(decreases) the track number by one; holding it down
increases (decreases) the track number faster.
5-3 Locating a Track
Numeric buttons
p(P
0)
=+
r
PLAY/PAUSE button
AMS control
=/+ buttons
p(P
0)
=+
r
> button
AMS control