Filter
Top Products
5-8 Starting Playback Instantly (Multi-Access Function)
Chapter 5 Playback
5-12 Chapter 5 Playback
To specify tracks for Multi-Access
playback
1 Press the EDIT/NO button.
The Edit menu appears.
2 Turn the AMS control to display “012:M-Access?”
3 Press the AMS control.
The display for specifying tracks appears.
To delete tracks from the track list for Multi-
Access playback
Press the 0 or ) button until the track to be
deleted begins flashing, then press the EDIT/NO
button.
To change a track number
Press the 0 or ) button until the track number to
be changed begins flashing, turn the AMS control to
change the track number, then press the ENTER/YES
button. Press the 0 or ) button again to change
another track number.
To delete all tracks
Hold down the EDIT/NO button until all the tracks are
deleted.
4 Turn the AMS control to select a track, then press
the AMS control.
The position for the second track begins flashing.
Repeat this step to specify up to 10 tracks.
5 Press the ENTER/YES button to complete the
track specification procedure.
To specify track numbers using the
numeric buttons
In step 4 , use the numeric buttons on the remote
controller or a keyboard to enter track numbers. After
entering a track number, the next track position begins
flashing immediately.
To change a part of the track list
In step 3, press the 0 or ) button until the track
to be changed starts flashing. Use the numeric
button(s) of the remote controller or the keyboard to
change the track number, then press the ENTER
button.
Press the 0 or ) button again to change another
track number.
Storing the beginning of a track
The beginning of a track is stored in the built-in
memory when:
• you change the disc while the Multi-Access function
is selected.
• you specify a track for Multi-Access playback using
the Edit menu while the Multi-Access function is
selected.
• you select the Multi-Access function in the Edit menu
after specifying tracks for Multi-Access playback.
15
2,3,4
p(P
0)
=+
r
/0/
001 00 00 00
/3-0/
002 00 34 65