Filter
Top Products
Chapter 5 Playback
Chapter 5 Playback 5-9
To make a program
1 Press the EDIT/NO button.
The Edit menu appears.
2 Turn the AMS control until “011:Program ?”
appears.
3 Press the AMS control.
The display for programming tracks appears.
To delete tracks from a program
Press the 0 or ) button until the track to be
deleted begins flashing, then press the EDIT/NO
button.
To change a programmed track number
Press the 0 or ) button until the track number to
be changed begins flashing, turn the AMS control to
change the track number, then press the ENTER/YES
button. Press the 0 or ) again to change another
track number.
To delete an entire program
Press the EDIT/NO button until all the tracks in the
program are deleted.
4 Turn the AMS control to select a track, then press
the AMS control.
The position for the second track begins flashing.
Repeat this step to program up to 25 tracks.
5 Press the ENTER/YES button to complete the
program.
To specify track numbers using the
numeric buttons
In step 4, use the numeric buttons on the remote
controller or a keyboard to enter track numbers. After
entering a track number, the next track position begins
flashing immediately.
To change a part of the program
In step 3, press the 0 or ) button until the track
to be changed starts flashing. Use the numeric
button(s) of the remote controller or the keyboard to
change the track number, then press the ENTER
button. Press the 0 or ) button again to change
another track number.
15
2,3,4
p(P
0)
=+
r
/0/
001 00 00 00
/3-0/
002 00 34 65