Filter
Top Products
Chapter 8 Maintenance
Chapter 8 Maintenance 8-1
8-1 Cleaning and Reset Switch
Use a soft cloth slightly moistened with a mild
detergent solution to clean the cabinet and panel
surface. Do not use solvents that may damage the
surface such as paint thinner, benzine, or alcohol.
About the reset switch
Removing the screws with a Phillips screwdriver from
both side of the MD deck (two screws on each side)
and the rear panel (one screw) allows you to open the
top panel of the MD deck. You may find the reset
switch on the internal board. Pressing the reset switch
allows you to reset the microcomputer.
Note
Do not press the reset switch in usual operations. Use
the reset switch only when the microcomputer hangs to
cause the malfunction of the deck, when the any button
operations are not accepted, and the like.
Chapter 8 Maintenance
Reset switch