Filter
Top Products
Chapter 7 Setup Menu
Chapter 7 Setup Menu 7-7
By pressing the REHEARSAL button, the MD deck
starts the rehearsal playback from the position you
pressed the REHEARSAL button for the specified
time.
You can change the time length and interval for
rehearsal playback using the setup menu.
See “5-2-4 Rehearsal Playback” on page 5-3 for details.
Rehearsal playback time setting (F21:
Rehearsal length)
You can set the rehearsal playback time in frame
ranging from 0 second 00 frame to 9 seconds 85
frames.
The factory setting is 2 seconds 00 frame.
Rehearsal playback interval setting (F22:
Rehearsal interval)
You can set the interval for rehearsal playback in 0.5
second ranging from 0.0 second to 8.0 seconds.
The factory setting is 1.0 second.
Setting the rehearsal playback function
1 Press the EDIT/NO button while holding down the
STOP button.
The Setup menu appear.
2 Turn the AMS control until the menu item you
want to set up appears.
F21: “RH (L) 2s00f” (Rehearsal playback time
setting)
F20: “RH (I) 1.0s” (Interval for rehearsal
playback)
3 Press the AMS control.
The indication flashes to show that you can change
the setting.
4 Turn the AMS control to set the value.
5 Press the AMS control to affect the setting and exit
from the Setup menu.
7-7 Setting the Rehearsal Playback Function
1 2 – 5
p(P
0)
=+
r
Rehearsal playback
Rehearsal playback
RH(L)
RH(L)
RH(I)