Filter
Top Products
Chapter 4 Recording
Chapter 4 Recording 4-1
4-1 Selecting the Input Signal
To select the input signal for recording, do the
following Setup menu procedure.
1 Press the EDIT/NO button while holding down the
STOP button.
The Setup menu appears in the display window.
2 Turn the AMS control to display the F01: Analog
In menu indication.
3 Press the AMS control.
The indication flashes and you can change the
setting.
Chapter 4 Recording
1
5
2,3,4
p(P
0)
=+
r
Kill Almost
F26
Analog In
F01
4 Turn the AMS control to one of the following
items. Then press the AMS control to select the
item.
“Analog In”: Selects analog input from the
ANALOG IN connectors
“DIN AES/EBU”: Selects the digital input from
the AES/EBU connectors
“DIN Coaxial”: Selects digital input from the
SPDIF IN connectors
5 Press the EDIT/NO button to exit from the Setup
menu.
Recording track numbers automatically
During analog or AES/EBU signal input
Use the LevelSync function to automatically record a
track number whenever the deck detects an inaudible
portion.
To set the LevelSync function, see “7-2 LevelSync Setting
(Track Marking Function)” on page 7-2.
To set the input reference level, see “3-4 Setting the Analog
Input and Output Reference Level” on page 3-6.
During digital input from the IEC(958)
connectors
When recording from a consumer MD deck
*
, a CD
player
*
, an MDS-B6P, or another MDS-B5, the MDS-
B5 automatically records track numbers according to
the level and U-bit of the digital input signal,
regardless of the LevelSync setting.
*
An MD deck or a CD player that is able to output digital
signals with a Q-code added as a U-bit.
..........................................................................................................................................................................................................