Filter
Top Products
Getting Started
Setting Application Event Log Options
5-20 SN0054651-00 F
S
If a configuration change occurs, a message appears, stating “Would
you like to refresh the Configuration for Hostname:
<hostname/ip_address>.” Do one of the following:
To refresh the configuration, click Yes.
To not update to the new configuration, click No. The old
configuration remains unchanged. To update to the current
configuration, manually connect and disconnect the host.
If you want to ignore the configuration change, click Ignore
Configuration Changes. The old configuration remains unchanged.
To update to the current configuration, manually connect and
disconnect the host.
3. When you finish making selections, do one of the following:
To save the changes and close the Options dialog box, click OK.
To close the Options dialog box without saving any changes, click
Cancel.
Setting Application Event Log Options
Follow these steps to set the maximum number of events the Application Event
Log can list and the types of logging events recorded.
To set event log options:
1. To access the Options dialog box, choose one of the following methods:
On the SANsurfer FC HBA Manager main window, open the Settings
menu, and then click Options.
Right-click the FC/CNA HBA tree, and then on the shortcut menu, click
Options.
Press CTRL+SHIFT+T.
NOTE:
Selecting Ignore Configuration Changes disables the Refresh
button on the main window.
NOTE:
See the SANsurfer FC HBA Manager Application Help for information about
viewing the Application Event Log.