Fujitsu DX60 Portable Media Storage User Manual


 
Chapter 1 Components
1.2 Drive Enclosures
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
25
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
Table 1.8 Status and meanings of each LED (in front of drive enclosure)
Disk
Figure 1.21 3.5" disk
Figure 1.22
shows the slot number of each disk.
Figure 1.22 Disk slot numbers (drive enclosure)
Part explanation
LEDs
The states of LEDs are listed below.
Table 1.9 Status and meanings of each LED (3.5" disks)
LED name LED status Drive enclosure status
POWER
(green)
DC power is supplied to the drive enclosure.
READY
(green)
The ETERNUS DX Disk storage system is available for
use.
FAULT
(orange)
The drive enclosure is in error status.
(blinks orange)
A part of the drive enclosure requires preventive
maintenance.
IDENTIFY
(blinks blue)
As ordered via ETERNUS Web GUI, the installation
location of the drive enclosure is identified.
(off)
LED name LED status Disk status
DISK READY/
FAULT
(green)
The disk is operating normally.
(blinks green)
(orange)
The disk is in error status.
DISK READY/FAULT LED
Slot#0
Slot#4
Slot#8
Slot#1
Slot#5
Slot#9
Slot#2
Slot#6
Slot#10
Slot#3
Slot#7
Slot#11