Fujitsu DX60 Portable Media Storage User Manual


 
Appendix A Event Notification Message List
A.2 Message List
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
108
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
I 00000012 9 Snap Data Pool (SDP) capacity reached $a%. (Policy Level2:
Threshold $b%)
These messages
are notified when
"Warning condition
defined by SDP
policy" is enabled
for Informational
Level in the event
notification setting.
Detail information is not displayed.
Snap Data Pool (unencrypted) usage rate exceeds the threshold
(Level2) $a% and reaches $b%.
$a: Usage rate of Snap Data Pool
$b: Threshold of Snap Data Pool
I 00000012 9 Snap Data Pool (SDP) capacity of the encryption reached $a%. (Policy
Level2: Threshold $b%)
Detail information is not displayed.
Snap Data Pool (encrypted) usage rate exceeds the threshold (Level2)
$a% and reaches $b%.
$a: Usage rate of Snap Data Pool
$b: Threshold of Snap Data Pool
I 00000013 9 Snap Data Pool (SDP) capacity reached $a%. (Policy Level3:
Threshold $b%)
These messages
are notified when
"Error condition
defined by SDP
policy" is enabled
for Informational
Level in the event
notification setting.
Detail information is not displayed.
Snap Data Pool (unencrypted) usage rate exceeds the threshold
(Level3) $a% and reaches $b%.
$a: Usage rate of Snap Data Pool
$b: Threshold of Snap Data Pool
I 00000013 9 Snap Data Pool (SDP) capacity of the encryption reached $a%. (Policy
Level3: Threshold $b%)
Detail information is not displayed.
Snap Data Pool (encrypted) usage rate exceeds the threshold (Level3)
$a% and reaches $b%.
$a: Usage rate of Snap Data Pool
$b: Threshold of Snap Data Pool
I 00000020 9 %d RAID group(s) created This message is
notified when
"Created RAID
Group" is enabled
for Informational
Level in the event
notification setting.
RAID Group LV CM Capacity
$a:$b $c $d $e
$a:$b $c $d $e
$a:$b $c $d $e
:
%d RAID groups are registered.
%d: Quantity
$a: RAID group number
$b: RAID group name
$c: RAID level
$d: Assigned CM
$e: Capacity
I 00000021 9 %d RAID group(s) deleted This message is
notified when
"Deleted RAID
Group" is enabled
for Informational
Level in the event
notification setting.
RAID Group
$a:$b
$a:$b
$a:$b
:
%d RAID groups are deleted.
%d: Quantity
$a: RAID group number
$b: RAID group name
Event type
and event
code
SNMP
Trap
Upper: Message
Remarks
Middle: Detail information
Trap
No.
Lower: Description