Filter
Top Products
Transferring (Dubbing)
60
VQT0P03
VHSDVD
You can transfer (dub) titles recorded on a disc° onto a tape with one
stroke of the button.
In One Touch Transfer (dubbing), all contents on the disc are
automatically transferred (dubbed) onto the tape.
° Available discs for transfer (dubbing) onto tape are [RAM] [-R]
[-RW‹V›] [+R] [-RW‹VR›].
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD (Recording source)
≥Press [DVD].
≥Insert the disc containing the title to be copied. (l 8)
≥Playing back DVD.
≥Press [AUDIO] to select the audio you wish to record.
[RAM] [-RW‹VR›]
≥Stop the disc. (l right)
VHS (Recording target)
≥Press [VHS].
≥Insert a video cassette with an intact accidental erasure prevention
tab. (l 48)
≥Confirm that the remaining tape time is sufficient for recording.
(l 55)
≥Select the recording mode. (l 51)
Settings (l 42, TV System)
≥When transferring (dubbing) an NTSC disc to a tape
- Set “TV System” on “Connection” in SETUP to “NTSC”.
≥When transferring (dubbing) a PAL disc to a tape
- Set “TV System” on “Connection” in SETUP to “PAL”.
[1] Press and hold [VHS —, DUBBING] for about 3
seconds or more (until “START” on the unit’s
display terminates flashing).
On the main unit, press [VHS —].
≥Check if transfer (dubbing) starts properly.
≥The “DUBBING” indicator on the main unit
lights.
≥Transferring (Dubbing) is automatically
completed when playback of the disc is
finished or the tape reaches its end.
∫To stop transfer (dubbing) in the middle
Press [∫, STOP] or press and hold [RETURN] for about 3 seconds
or more.
Note
≥You cannot operate for transferring (dubbing) while timer recording
standby on both DVD and VHS. Cancel the timer recording
standby.
≥When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
≥If you start transfer (dubbing) when the resume function (l 19) is
activated, the DVD is transferred (dubbed) from the beginning of
the title which you stopped.
Transfer (Dubbing) from DVD
∫ One Touch Transfer (dubbing)
(DVD l VHS)
DVD ERASE
REC
REC MODE
STATUSDISPLAY
VHS DVD
CREATE
CHAPTER
JET REW
TIMER
DUBBING
ABC
F Rec
REC
DUBBING
VHS
AB
DVD
SLOW/
SEARCH
REW
FF
PLAY
S
TIME SLIP
DIRECT NAVIGATOR
TOP MENU
RETURN
CANCEL/RESET
STATUSDISPLAY
SUB MENU
JET REW
SKIP/ INDEX
FUNCTIONS
G-Code
PROG/CHECK
PLAY
S
FUNCTIONS
RETURN
SUB MENU
INDEX
OPERATION
SELECT
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
VHS
DVD
TRACKING/V-LOCK
G-Code
DVD/ VHS
AV
AUDIO
VHS
DVD
VHS
DVD
AUDIO
RETURN
1
;
∫
µ
:, 9
3, 4, 2, 1
ENTER
SUB MENU
FUNCTIONS
VHS —/A
B
VHS DVD
VHS DVD
CH REC
DUBBING
/k1.3
DUBBING indicator
∫When you transfer (dub) a whole disc
Make sure that the DVD is stopped.
≥When the resume function is activated (l 19), press [∫, STOP]
to deactivate it.
∫When you transfer (dub) a title from the beginning of
the selected title to the end of the disc
∫When you transfer (dub) a playlist from the
beginning of the selected playlist to the last playlist
Press [1, PLAY] to play back the desired title or playlist
(l 35).
≥You can transfer (dub) (a title or playlist) while playback is
paused by pressing [;, PAUSE].
≥You cannot transfer (dub) the playlist which is longer than
8 hours. (When you transfer (dub) multiple playlists, the playlist
which is longer than 8 hours is omitted.)
∫About Recording VISS (l 54)
When transferring (dubbing) from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired titles
with [:, INDEX] or [9, INDEX].
≥Index signals will not be recorded automatically in the manual
transfer (dubbing) function (l 64). If you want to record index
signals, press [¥, REC] on the remote controller at the position
you want while transferring (dubbing) in VHS mode (l 11).
M7620(GN).book 60 ページ ２００５年５月２５日 水曜日 午後１２時２分