Filter
Top Products
Transferring (Dubbing)
57
VQT0P03
Transferring
(Dubbing)
VHSDVD
You can transfer (dub) programmes recorded on a tape onto a disc°
with one stroke of the button.
In One Touch Transfer (Dubbing), programmes are automatically
transferred (dubbed) onto the disc from the location of playback at
the time when the transfer (dubbing) of the tape starts.
° Available discs for transfer (dubbing) from tape are [RAM] [-R]
[-RW‹V›] [+R].
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
VHS (Recording source)
≥Press [VHS].
≥Insert the video cassette containing the programme to be copied.
(l 48)
≥Press [AUDIO] to select the audio you wish to record.
≥Stop the tape at the position where you wish to start recording.
DVD (Recording target)
≥Press [DVD].
≥Release protection. (disc l 28, cartridge l 28) [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 8, 47)
≥Select the recording mode. (l 23)
Settings (l 42, TV System)
≥When transferring (dubbing) an NTSC tape to a DVD
- Set “TV System” on “Connection” in SETUP to “NTSC”.
≥When transferring (dubbing) a PAL tape to a DVD
- Set “TV System” on “Connection” in SETUP to “PAL”.
[1] While both DVD and VHS are stopped
Press and hold [“ DVD, DUBBING] for about 3
seconds or more (until “START” on the unit’s
display terminates flashing).
On the main unit, press [“ DVD].
≥Check if transferring (dubbing) starts properly.
≥The “DUBBING” indicator on the main unit
lights.
≥Transferring (Dubbing) is automatically
completed when the tape reaches its end or
the disc becomes full.
∫To stop transfer (dubbing) in the middle
Press [∫, STOP] or press and hold [RETURN] for about 3 seconds
or more.
Note
≥You cannot operate for transferring (dubbing) while timer recording
standby on both DVD and VHS. Cancel the timer recording
standby.
≥When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
Transfer (Dubbing) from VHS
∫ One Touch Transfer (Dubbing)
(VHS l DVD)
S
DVD ERASE
REC
REC MODE
TIME SLIP
TOP MENU
RETURN
STATUSDISPLAY
SUB MENU
VHS DVD
CREATE
CHAPTER
JET REW
TIMER
DUBBING
ABC
F Rec
PROG/CHECK
DUBBING
DVD
RETURN
SLOW/
SEARCH
REW
FF
PLAY
DIRECT NAVIGATOR
TOP MENU
SKIP/ INDEX
FUNCTIONS
OPERATION
SELECT
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
VHS
DVD
TRACKING/V-LOCK
G-Code
DVD/ VHS
AV
AUDIO
VHS
DVD
DVDVHS
AUDIO
∫
“ DVD
RETURN
VHS DVD
VHS DVD
CH REC
DUBBING
/k1.3
DUBBING indicator
∫Dividing a title to be transferred (dubbed)
When transferring (dubbing) from VHS to DVD, the title is divided
by index signal (l 54) detected and then recorded. You can search
desired titles with Direct Navigator (l 31) after transfer (dub) to
DVD.
≥Titles recorded within 15 minutes of each other may not be
divided properly.
≥The recording time may become longer than the original title
depending on the number of index signals.
If you want to transfer (dub) without dividing the contents into
titles, follow the methods below.
≥Set “Time Setting” to “On” on the GUI Transfer (l 58).
≥Manual Transfer (l 59).
M7620(GN).book 57 ページ ２００５年５月２５日 水曜日 午後１２時２分