Filter
Top Products
Recording
26
VQT0P03
DVD
[RAM] [-R] [-RW‹V›] [+R]
You can enter up to 16 programmes a month in advance.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
≥Check that the clock is set to the correct time. If it has not been set,
set it (l 46).
≥Release protection (disc l 28, cartridge l 28) [RAM].
≥Insert a disc (l 8) and confirm there is sufficient empty space for
recording on it (l 47).
≥[-R] [-RW‹V›] [+R] When recording bilingual broadcasts, only the
audio selected in “Bilingual Audio Selection” (l 42) is recorded
(“M 1” or “M 2”).
≥Press [DVD].
Entering the G-
CODE
®
numbers is an easy way of timer recording.
You can find these numbers in TV listings in newspapers and
magazines.
[1] Press [G-Code].
[2] Press the numeric buttons to enter the G-
CODE
number.
≥Press [2] to move back to correct a digit.
[3] Press [ENTER].
≥Confirm the programme and correct it if necessary using [3,
4, 2, 1] (“Manual programming” l right, step 3).
≥Mode (Recording mode)
XP,.SP,.LP,.EP,.FR (l 23)
^------------------------------------J
You can also press [REC MODE] to change the recording
mode.
≥To enter the name of the programme
Press [2, 1] to select “Programme Name” and press [ENTER]
(l 30).
≥If “-- -----” appears under “Name”, press [3, 4] to select a
desired programme position.
After you have entered the information of a TV station, it is kept
in the unit’s memory.
≥“Invalid Entry” is displayed when you enter the wrong G-
CODE
number. Re-enter the G-
CODE number.
[4] If the programme is correct
Press [ENTER].
≥Make sure that the timer recording has been programmed
correctly on the TIMER RECORDING screen (l 27).
≥Repeat steps 1–4 to programme other recordings.
[5] Press [ , TIMER].
≥“ ” lights on the DVD unit’s display.
The timer recording standby mode is activated on DVD.
However, the unit may not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record on VHS even if
the timer recording standby mode is activated on DVD.
≥Timer recording can be started whether the unit is turned on or off.
[6] Turn the unit off when you do not play on DVD
(DVD-RAM) or, play or record on VHS.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed. You can turn the unit off during timer
recording.
∫To release the unit from recording standby
Press [ , TIMER].
“ ” goes out.
≥Be sure to press [ , TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only if
“ ” is displayed.
∫To cancel recording when recording has already
begun
Press [ , TIMER].
≥You can also press and hold [∫] on the DVD main unit for more
than 3 seconds to stop recording.
Note
Refer to Note in Manual programming (l 27).
[1] Press [PROG/CHECK].
≥Make sure “New Timer Programme” is selected.
[2] Press [ENTER].
[3] Press [2, 1] to move
and change the items
with [3, 4].
≥You may use the numeric
buttons to enter “Name”, “Date”, “Start”, and “Stop”.
≥Name (Programme Position/TV Station Name)
≥Date
You can also make a daily or weekly programme.
Each daily or weekly programme is counted as one
programme.
≥Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
Timer Recording
∫ Using G-CODE system
SLOW/
SEARCH
REW
FF
PLAY
S
OPERATION
SELECT
DVD ERASE
REC
REC MODE
TIME SLIP
DIRECT NAVIGATOR
TOP MENU
RETURN
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
VHS
DVD
TRACKING/V-LOCK
SUB MENU
VHS DVD
CREATE
CHAPTER
JET REW
SKIP/ INDEX
TIMER
DUBBING
ABC
FUNCTIONS
G-Code
F Rec
DVD/ VHS
PROG/CHECK
AV
PROG/CHECK
REC MODE
TIMER
G-Code
CANCEL
DVD
DVD
REC MODE
3, 4, 2, 1
ENTER
G-Code
PROG/CHECK
Numeric
buttons
G-Code
Remain
2:00 SP
12:53:00 13. 7. TUE
TIMER
RECORDING
Mode
StopStart
Name
Date
20.7. TUE 11:0010:00 SP
Programme Name
P ENTER t t
1
***
01
Remain
2:00 SP
12:53:00 13. 7. TUE
∫ Manual programming
Disc
space
No.
01
SP
OK
New Timer Programme
TIMER
RECORDING
Mode
StopStart
Name
Date
***
01
20.7. TUE
11:0010:00
Remain
2:00 SP
12:53:00 13. 7. TUE
“New Timer
Programme” is
selected.
Mode
P ENTER t t
: :
TIMER
RECORDING
StopStart
Name
Date
Programme Name
..
SP
Remain
2:00 SP
12:53:00 13. 7. TUE
M7620(GN).book 26 ページ ２００５年５月２５日 水曜日 午後１２時２分