Filter
Top Products
Convenient functions
42
VQT0P03
DVD
≥Underlined items are the factory default settings.
∫Sound
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range (l 66) for easier listening in low volume.
[On] [Off
]
Bilingual Audio Selection
Select whether to record the main or secondary audio type when
recording to DVD-R, DVD-RW (DVD-Video format) or +R. (You
cannot select this when recording from an external device or TP
channel. Select it on the external device or VHS.)
[M 1
][M2]
Digital Audio Output
Change the settings when you have connected equipment through
the unit’s DIGITAL AUDIO OUT terminal (l 15).
Note
Incorrect settings can cause noise to be output which can be harmful
to your ears and speakers, and audio will not be recorded properly
on media such as mini discs.
Press [ENTER] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz
or 88.2 kHz, or the disc has copy protection.
[On] [Off
]
Dolby Digital
Choose whether to output by “Bitstream” which processes Dolby
Digital signals on other connected equipment or to convert the
signals to “PCM” (2 channels) on the unit before output.
[Bitstream
][PCM]
DTS
Choose whether to output by “Bitstream” which processes DTS
signals on other connected equipment or to convert the signals to
“PCM” (2 channels) on the unit before output.
[Bitstream
][PCM]
MPEG
Choose whether to output by “Bitstream” which processes MPEG
signals on other connected equipment or to convert the signals to
“PCM” (2 channels) on the unit before output.
[Bitstream] [PCM
]
∫Display
On-Screen Messages
Choose whether to show status messages automatically or not.
[Automatic
] [Off]
Grey Background
Select whether to show the grey background, normally shown when
TV reception is poor.
[On
] [Off]
FL Display
Changes the brightness of the unit’s display.
[Bright
] [Dim] [Automatic]
≥When “Power Save” is set to “On” (l 43), this setting is
automatically set to “Automatic”.
∫Connection
TV Aspect
(l 17)
[16:9] [4:3
] [Letterbox]
Progressive (l 18)
[On] [Off
]
TV System
[PAL][NTSC]
≥To change the TV system (PAL/NTSC) setting:
While stopped, keep pressing [∫] on the DVD main unit and
[< OPEN/CLOSE] on the main unit for 5 or more seconds.
On Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or
88.2 kHz.)
Off Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Bitstream When you have connected the unit to a piece of
equipment having Dolby Digital logo.
PCM When you have connected the unit to a piece of
equipment that doesn’t have Dolby Digital logo.
Bitstream When you have connected the unit to a piece of
equipment having DTS logo.
PCM When you have connected the unit to a piece of
equipment that doesn’t have DTS logo.
Bitstream When you have connected the unit with a built-in
MPEG decoder.
PCM When you have connected the unit that doesn’t have
a built-in MPEG decoder.
Automatic The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is
turned off, the unit’s display disappears. While using
this mode the standby power consumption can be
reduced.
On Select when connecting to an LCD or plasma
television with component video input terminals.
Off Select when connecting to a regular television (CRT:
Cathode ray tube) even if it is progressive compatible.
PAL Select when connecting to a PAL or Multi-system TV.
Programmes recorded using NTSC are played as
PAL60.
Select to record TV programmes and PAL input from
other equipment.
NTSC Select when connecting to a NTSC TV.
Programmes recorded using NTSC are played as
NTSC.
Select to record NTSC input from other equipment.
TV programmes cannot be recorded properly on
DVD.
/
/
/
M7620(GN).book 42 ページ ２００５年５月２５日 水曜日 午後１２時２分