Filter
Top Products
Recording
52
VQT0P03
VHS
You can enter up to 16 programmes a month in advance.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
≥Check that the clock is set to the correct time. If it has not been set,
set it (l 46).
≥Insert a video cassette with an intact accidental erasure prevention
tab. (l 48)
≥Press [VHS].
Entering the G-
CODE
®
numbers is an easy way of timer recording.
You can find these numbers in TV listings in newspapers and
magazines.
[1] Press [G-Code].
[2] Press the numeric buttons to enter the G-
CODE
number.
≥Press [2] to move back to correct a digit.
[3] Press [ENTER].
≥ Confirm the programme and correct it if necessary using [3,
4, 2, 1]. (Manual programming l 53, step 3)
≥ (Recording mode) (l 51)
SP,.LP,.EP,.A°
^--------------------------J
° Recording mode Auto Change Function (l 53)
You can also press [REC MODE] to change the recording
mode.
≥If “-- -----” appears under “Name”, press [3, 4] to select a
desired programme position.
After you have entered the information of a TV station, it is kept
in the unit’s memory.
≥“Invalid entry” is displayed when you enter the wrong G-
CODE
number. Re-enter the G-
CODE number.
[4] If the programme is correct
Press [ENTER].
≥Repeat steps 1–4 to programme other recordings.
[5] Press [ , TIMER].
≥“ ” lights on the VHS unit’s display.
The timer recording standby mode is activated on VHS.
However, the unit may not be turned off automatically.
≥You can play or record any media on DVD even if the timer
recording standby mode is activated on VHS.
≥Timer recording can be started whether the unit is turned on or off.
[6] Turn the unit off when you do not play or record
on DVD.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed. You can turn the unit off during timer
recording.
∫To release the unit from recording standby
Press [ , TIMER].
“ ” goes out.
≥Be sure to press [ , TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only if
“ ” is displayed.
∫To cancel recording when recording has already
begun
Press [ , TIMER].
≥You can also press and hold [∫] on the VHS main unit for more
than 3 seconds to stop recording.
Note
Refer to Note in Manual programming (l 53).
Timer Recording
SLOW/
SEARCH
REW
FF
PLAY
S
OPERATION
SELECT
DVD ERASE
REC
REC MODE
TIME SLIP
DIRECT NAVIGATOR
TOP MENU
RETURN
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
VHS
DVD
TRACKING/V-LOCK
SUB MENU
VHS DVD
CREATE
CHAPTER
JET REW
SKIP/ INDEX
TIMER
DUBBING
FUNCTIONS
G-Code
F Rec
DVD/ VHS
PROG/CHECK
AV
PROG/CHECK
REC MODE
TIMER
G-Code
CANCEL
VHS
VHS
REC MODE
3, 4, 2, 1
ENTER
G-Code
PROG/CHECK
Numeric
buttons
∫ Using G-CODE system
G-code
- - - - - - - - -
Timer recording
-- ----- --.-- --:-- --:-- -
- - - - - - - - - . - - - - : - - - - : - - -
20.7 10:00 11:00 SP
Name Date Start Stop
1/3
1 01
M7620(GN).book 52 ページ ２００５年５月２５日 水曜日 午後１２時２分