Filter
Top Products
Convenient functions
54
VQT0P03
VHS
Convenient functions
The unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
programme quickly and easily.
While stopped or during normal play
Press [:, INDEX] or [9, INDEX].
≥The unit automatically starts playback after the
index signal is found.
≥Each press increases the number of skips.
∫To cancel the index search
Press [∫, STOP].
Note
≥Up to 20 index signals can be searched for in both directions.
≥When you press either one of the buttons too much, you can
control the number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the index signals are too
close together. Make recordings of at least 5 minutes.
[1] While stopped
Press [FUNCTIONS].
[2] Use [3, 4] to select a desired item.
[3] Press [ENTER] or [2, 1] to change the setting.
∫To exit the settings screen
Press [RETURN].
This description shows the initial settings for the unit. For
details on menu operation (l above).
≥ Underlined items are the factory default settings.
∫VHS FUNCTIONS
Timer recording
(l 53)
QUICK ERASE (l 55)
You can delete a cassette contents all at once.
Tape length
Set the length of tape you are using so the unit can show the correct
remaining time.
[AUTO (
2E-240)] [E-195] [E-260] [E-300]
[AUTO (
2E-240)]:The VHS automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
[E-195]: For E195 tape
[E-260]: For E260 tape
[E-300]: For E300 tape
SQPB
To play back tapes recorded in the S-VHS format (SQPB; S-VHS
Quasi Playback)
[AUTO
] [ON] [OFF]
[AUTO
]: This unit automatically detects the format in which
the recording was made and selects the same
format for playback. However, picture distortion may
appear. Therefore, set to [ON] or [OFF].
[ON]: Use this setting when playing back a cassette tape
recorded in the S-VHS format.
[OFF]: Use this setting when playing back a cassette tape
recorded in the VHS format only.
OSD (l 55)
For automatic display on the TV screen of the TV station information,
type of sound system of the programme being watched and the
sound playback mode.
[4:3
][WIDE][OFF]
[4:3
]: Indications can be displayed on the TV screen.
[WIDE]: Indications can be displayed on the TV screen when
using wide type of TV screen and selecting the wide
screen mode on the TV setting.
[OFF]: No indications appears.
Preparation
≥Press [VHS].
VHS Index Search System (VISS)
∫Index signals are recorded in the following cases.
≥When a recording is started by pressing [¥, REC].
≥When timer recording is started.
SLOW/
SEARCH
REW
FF
PLAY
S
OPERATION
SELECT
DVD ERASE
REC
REC MODE
TIME SLIP
DIRECT NAVIGATOR
TOP MENU
RETURN
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
VHS
DVD
TRACKING/V-LOCK
SUB MENU
VHS DVD
CREATE
CHAPTER
JET REW
SKIP/ INDEX
TIMER
DUBBING
FUNCTIONS
G-Code
F Rec
DVD/ VHS
PROG/CHECK
AV
INDEX
REC
FUNCTIONS
RETURN
RESET
STATUS
AUDIO
VHS
VHS
AUDIO
STATUS
∫
:, 9
µ
3, 4, 2, 1
ENTER
RETURN
FUNCTIONS
Changing the unit’s settings
∫ Common procedures
1 Summary of settings
VHS FUNCTIONS
: access
ENTER
: return
RETURN
: select
Timer recording
QUICK ERASE
Tape length : AUTO ( E - 240)
SQPB : AUTO
OSD : 4 : 3
M7620(GN).book 54 ページ ２００５年５月２５日 水曜日 午後１２時２分