Filter
Top Products
Recording
27
VQT0P03
Recording
DVD
≥Mode (Recording mode)
XP,.SP,.LP,.EP,.FR (l 23)
^------------------------------------J
You can also press [REC MODE] to change the recording
mode.
≥Programme Name
Press [2, 1] to select “Programme Name” and press [ENTER]
(l 30).
[4] Press [ENTER] when you have finished making
changes.
≥Make sure that the timer recording has been programmed
correctly on the TIMER RECORDING screen (l right).
≥“Invalid Entry” is displayed when you enter the wrong item.
Re-enter the item.
≥To continue programming
Select “New Timer Programme” and repeat steps 2–4.
[5] Press [ , TIMER].
≥“ ” lights on the DVD unit’s display.
The timer recording standby mode is activated on DVD.
However, the unit may not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record on VHS even if
the timer recording standby mode is activated on DVD.
≥Timer recording can be started whether the unit is turned on or off.
[6] Turn the unit off when you do not play on DVD
(DVD-RAM) or, play or record on VHS.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed. You can turn the unit off during timer
recording.
∫To release the unit from recording standby
Press [ , TIMER].
“ ” goes out.
≥Be sure to press [ , TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only if
“ ” is displayed.
∫To cancel recording when recording has already
begun
Press [ , TIMER].
≥You can also press and hold [∫] on the DVD main unit for more
than 3 seconds to stop recording.
Note
≥“ ” flashes for about 5 seconds when the unit cannot go to timer
recording standby (non-recordable disc or protected disc, etc.).
Check the disc carefully.
≥If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording starting
time, the “ ” flashes on the unit display. In this case, press
[ , TIMER] to put the unit in the timer recording standby mode.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes [a few seconds when
recording with DVD-RAM and approximately 30 seconds when
recording with DVD-R, DVD-RW (DVD-Video format) and +R].
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
Preparation
≥Press [DVD].
[1] Press [PROG/CHECK].
Icon explanations (A)
¥ Currently recording
W Programmes are overlapped. Recording of the programme with
the later start time starts when the earlier programme finishes
recording.
F The disc was full (not enough space).
The TV programme may not be recorded due to copy-protect.
X Recording stopped. (Dirty disc, etc.)
Disc space (B)
OK: Recordable
# (Date): The last day of daily or weekly recording.
!: It may not be possible to record because:
≥the disc is write-protected
≥there is no more space left
≥the number of possible titles has reached its maximum.
[2] Press [3, 4] to select the programme.
≥You may also select programme by inputting a 2-digit number
using the numeric buttons.
e.g.: “5”: [0] )[5]
“15”: [1] )[5]
≥Press [2, 1] to move to the preceding or following page.
[3] Press [¢, CANCEL] to delete, or press [ENTER]
to change.
≥You cannot delete or change programmes that are currently
recording.
[4] If you pressed [ENTER] in step 3,
Use [3, 4, 2, 1] to change and press [ENTER].
≥To continue changing programmes steps 2–4.
[5] Press [ , TIMER].
≥“ ” lights on the DVD unit’s display.
The timer recording standby mode is activated on DVD.
However, the unit may not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record on VHS even if
the timer recording standby mode is activated on DVD.
≥Timer recording can be started whether the unit is turned on or off.
[6] Turn the unit off when you do not play on DVD
(DVD-RAM) or, play or record on VHS.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed. You can turn the unit off during timer
recording.
For your reference
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. 2 days later.
Check, change or delete programmes
7/ 6 TUE01 SP
OK
21:00 PM20:00 PM39
A
B
Disc
space
No.
New Timer Programme
TIMER
RECORDING
Mode
StopStart
Name
Date
Remain
2:00 SP
12:53:00 13. 7. TUE
M7620(GN).book 27 ページ ２００５年５月２５日 水曜日 午後１２時２分