Filter
Top Products
9840 Menu System
9840 Tape Drive Operations Guide—429596-002
B-19
How to View Drive Configuration of Software Level
2. If the user is in the Online/Offline menu and the unit is online, press the Select
switch once to change to Offline.
3. Press the Menu switch to go to the next menu subject, which is Configuration
Menu Processing.
Once in the menu system, the user can follow the display prompts, or follow the
instructions in the “SCSI Configuration Menu” section.
How to View Drive Configuration of Software Level
1. Enter the menu system by pressing the Menu switch once.
a. Observe the display and ensure that it shows “Online” or “Offline.”
2. If Offline, press the Select switch once to change to Online.
3. Press the Menu switch to go to the Configuration Main Menu. The display will
show “View CFG?”
a. To view the software release level only:
1. Press Menu once more,
2. Go to Step 4.
b. To view the drive configuration first:
1. Press Select,
2. Press Menu or Select repeatedly to see all the drive configurations, until
the user reaches the Configuration Exit Menu.
c. At the Configuration Exit Menu:
1. Press Menu to repeat the viewing, or,
2. Press Select to exit the Software Release Menu.
4. View the software release level. The format is:
Rx.yy.zzzc
Where:
x = major revision number
yy = minor revision number
zzz = the integration number
c = channel type (s = SCSI, e = Escon, f = Fibre)
5. After viewing the software release level, press Menu to exit the Main Exit Menu:
see “How to Repeat of Exit the Menu System,” for instructions on how to exit.