Filter
Top Products
Operating the 9840 Tape Drive
9840 Tape Drive Operations Guide—429596-002
3-3
Using the SCF STATUS Command
STATUS SCSI Command
This subsection describes the STATUS SCSI command for Open SCSI devices. The
command syntax is:
$ device-name
specifies the name of the Open SCSI I/O process.
-P | -B
specifies whether the path is the primary (-P) or the backup (-B).
DETAIL
Returns all status information.
Examples using STATUS SCSI
These are examples of the STATUS SCSI command:
•
To display the status of all Open SCSI devices on the system, type:
-> STATUS SCSI $*
•
To display the summary status of the Open SCSI device $DEV00, type:
-> STATUS $DEV00
•
To display the detailed status of the Open SCSI device $DEV00, type:
-> STATUS $DEV00, DETAIL
•
To display the summary status of the backup path of the Open SCSI device
$SD00, type:
-> STATUS $SDOO-B
STATUS SUBSYS Command
This subsection describes the STATUS SUBSYS command. The command
syntax is:
An Example Using STATUS SUBSYS
To display the summary status of storage subsystem manager, type:
-> STATUS SUSBSYS $ZZSTO
STATUS SCSI $ device-name [ -P | -B ]
STATUS SUBSYS $ZZSTO