Filter
Top Products
9840 Menu System
9840 Tape Drive Operations Guide—429596-002
B-13
SCSI Configuration Menu
4. Press Menu to advance to Z nibble: Z will flash.
5. Press Select to increment Z nibble to the desired value.
6. Press Menu to observe the whole address.
7. If okay, press Menu again to exit to the next sub-menu.
8. If it is not okay, press Select to repeat the process.
Save Configuration Sub-Menu In Configuration Main Menu
Selections: “Save CFG?” (Save Configuration?)
Displays: “Save Fails”
This Sub-Menu displays only if drive is offline AND the drive configuration was
changed.
1. If applicable, press Menu to access.
2. To save and go to the configuration exit menu, press Select:
3. “Saving CFG” displays for 2 seconds.
4. “Save Fails” displays for RAM problems: see Table A-2 in Appendix A for
instructions.
5. To not save and go to the configuration exit menu, press Menu.
Exit Configuration Sub-Menu In Configuration Main Menu
Selections: “Exit CFG?” (Exit Configuration?)
This submenu gives the user the opportunity to repeat the configuration.
1. If applicable, press Menu to access.
2. To repeat, edit, or review the configuration, press Menu (goes to Compress Mode,
which is the first configuration Sub-Menu).
3. To exit the menu system:
a. Press Select.
b. Press Menu repeatedly until “Exit Menu?” shows.
Main Exit Main Menu
Selections: “Exit Menu?”
This menu gives the user the opportunity to return the drive online, and stay in or exit
the menu system.
1. If applicable, press Menu to access.