Filter
Top Products
9840 Menu System
9840 Tape Drive Operations Guide—429596-002
B-15
Drive Operations Menu
Online/Offline Main Menu
Selections: “Online”
“Offline”
Defaults to Online.
“OffLn Pend”, “OnLn Pend” may display while waiting for system response or
diagnostics completion.
1. If applicable, press Menu to access.
2. To go online and exit operations:
a. Press Select to toggle to Online.
b. Press Menu repeatedly until “Exit Menu?” shows.
c. Press Select to exit.
3. To change configuration or to do special operations:
a. Press Select to toggle to Offline.
Press Menu several times to reach the Drive Main Menu.
Drive Main Menu
Selections: “Drv Menu?” (Drive Menu?)
This is the entry point to the drive Sub-Menus.
1. If applicable, press Menu to access.
2. Press Select to enter the drive Sub-Menus, OR press Menu to bypass the drive
menus.
Code Update Sub-Menu In Drive Main Menu
Selections: “IPL From Tp” (Initial Program Load Drive from New Firmware Tape)
Displays: “CodUpFailsx” (Code Update Fail Number x)
This selection updates the firmware in the drive from the firmware tape inserted in
drive.
1. Press Menu to bypass. If not bypassing:
2. Press Select to activate: if a tape is present in the drive it will be ejected.
3. When “Ld IPL TP” displays, insert write-protected firmware tape with desired code.
When done, the drive automatically ejects tape, IPL’s, and comes online.