Filter
Top Products
L700 Tape Library
9840 Tape Drive Operations Guide—429596-002
4-4
Display Screens
These values require user input:
•
Cleaning cartridge usage threshold
•
Drive configuration: SCSI ID and bus status (on or off bus)
•
Network configuration values: library name, IP address,
•
Library configuration values: SCSI ID, Fast Load enable/disable, date, time
•
Display brightness and contrast
In addition, the display screens must be used to:
•
Export cleaning cartridges through the CAPs
•
Run diagnostic tests
The following subsections describe the library’s main screens.
Library Status
The Library Status screen is an information-only screen. It is the first screen to appear
on the operator panel after an IPL. The screen displays the status of the CAPs, the
activity of the library, and the status of each of the installed drives. Figure 4-2 shows an
example of the Library Status screen.
By pushing the MENU button from the Library Status screen, the user can access the
Main Menu (see Figure 4-3).
Figure 4-2. Library Status Screen