Filter
Top Products
L700 Tape Library
9840 Tape Drive Operations Guide—429596-002
4-21
Reviewing FSC Logs
17. Remove the cleaning cartridge, and make a record of how many times it has been
used.
18. Press the CAP button to close the CAP.
Reviewing FSC Logs
A SDE or other StorageTek representative might ask the user to review the library’s
fault symptom code (FSC) log so the user can better analyze library-related problems.
The FSC log records significant events, warnings and errors that the library has
generated during operation.
To review the FSC log:
1. Press the MENU button until the Main Menu appears.
2. If necessary, press the arrow buttons until the cursor highlights “FSC LOGS.”
3. Press the SELECT button. The panel displays the FSC log screen.
4. Use the arrow buttons to scroll through the log.
This ample entry on the FSC logs screen, followed by an explanation of the entry’s
elements:
3329 03 NONE
03/01/2004 14:46:14
Running Diagnostic Tests
Diagnostic tests included in the library’s firmware let you manage certain aspects of the
library’s operation. The library may be placed in the demonstration mode through the
Diagnostics screen.
Note. The Auto Clean feature is automatically enabled if even one cleaning cartridge is loaded
into the reserved cell area and then the library is reset.
3229 This four-character code is the FSC.
03 This value indicates the number of times this FSC has occurred.
NONE This message indicates which, if any, mechanical device was involved.
03/01/2004 These digits indicate the date the FSC occurred. The fields from left to
right are month, day, and year.
14:46:14 These digits indicate the time the FSC occurred. The fields from left to
right are hour, minutes, and seconds.