Filter
Top Products
9840 Menu System
9840 Tape Drive Operations Guide—429596-002
B-20
How to Save, Abort, or Repeat Configuration
Changes
How to Save, Abort, or Repeat Configuration Changes
After the user has made changes in the configuration selections:
1. Press the Menu switch repeatedly until the configuration save menu is reached.
The display will show “Save CFG?”
2. Choose from the following as applicable:
a. To save and exit:
Press Select to save: “Saving CFG” is displayed for about two seconds.
Press Select again to exit to the next main menu.
b. To abort changes, keep the original configuration, and exit:
Press Menu to not save the changes.
Press Select to exit to the next main menu.
c. To abort changes and repeat configuration editing:
Press Menu to not save the changes.
Press Menu again to repeat the configuration editing.
How to Repeat or Exit the Menu System
When the user is finished with the menu operations:
1. If applicable, press the Menu switch repeatedly until the next exit menu is reached.
The display will show “Exit CFG?”, “Exit Drv?”, or “Exit Menu?”
If the user is at the “Exit CFG?” or “Exit Drv?” Menu
1. To repeat to the previous menu, press Menu.
2. To exit to the next main menu, press Select.
3. If the user wished to exit all menus, press Menu repeatedly until the main exit is
reached. “Exit Menu?” will be displayed.
If the User is at the “Exit Menu?” (Main Exit Menu):
1. To return to the menu system or place a drive online:
a. Press Menu: “Offline” will usually be displayed.
b. To change to Online and exit menu mode:
Note. The “saving” option is available only when exiting from the Configuration Main Menu if
any configuration menu item was changed. If the configuration wasn’t changed, the saving
option is bypassed.