Filter
Top Products
68
OTHERS
–
Troubleshooting
–
Symptom Action
The power does not come on.
The cassette cannot be loaded.
Unable to record.
The operation buttons of the main
unit do not work.
The 9 PIN REMOTE or SERIAL RE-
MOTE cannot be engaged with the
REMOTE SEL switch.
Noise appears on the playback
screen.
Playback audio is disrupted.
During DV signal input, the time
codes are not recorded correctly.
After holding down the EJECT
button of the main unit for 2 sec-
onds or longer, the menu screen
does not appear.
Video and sound are distorted for
a few seconds after starting play-
back.
The wireless remote controller
does not work at all.
Power is not supplied even when
the OPERATE button is pressed.
Is the AC adapter correctly connected?
Is the cassette indicator lit? If so, a cassette is already loaded.
Please unload the cassette first.
Push the center of the cassette and make sure that the cassette
enters levelly.
Is the slide of the cassette set to "REC"?
Please set it to "REC" if it is at the "SAVE" position.
Is the OPERATION LOCK item of the SYSTEM (2/2) menu set
to ON? Please set it to OFF so that the operation buttons of the
main unit can to be used.
During REMOTE mode, please use the LOCAL function menu
item to select the buttons to be rendered operable.
Is the REMOTE item of the REMOTE (1/2) menu set to OFF? To
use the 9 PIN REMOTE or the SERIAL REMOTE, please set it
to ON.
When the OPERATE LOCK item of the SYSTEM(2/2) menu is
set to ON, the REMOTE SEL switch will not function.
• Is the tape damaged?
Please replace the cassette.
• Is the head dirty?
Please clean it with the dedicated head-cleaning tape.
(
☞
Page 8)
Is the TC DUPLICATE item of the TIME CODE menu set cor-
rectly?
Is a cassette loaded? Before attempting to display the menu
screen with the EJECT button, please remove the cassette.
This occurs if the signal system of the playback tape is different
from the NTSC/PAL setting.
• Is the REMOTE SEL switch on the main unit set to WIRE-
LESS?
• Are the batteries exhausted?
Is the REMOTE SEL switch set at either SERIAL or 9 PIN when
the LOCAL FUNCTION item of the REMOTE menu is set to
something other than ALL KEYS? Please set the REMOTE SEL.
switch to WIRELESS.
69
OTHERS
–
Checking the hour meter
–
This unit displays the drum usage time on the DRUM HOUR METER item of the TOP MENU.
Please use it as a guide for regular maintenance.
☞
Page 7
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY
PAU SE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
EJECT
button
DISPLAY
BARS
MENU SEARCH+
SEARCH–
A.DUB
F.REV
INDEX– INDEX+
PLAY
STOP
REMOTE CONTROL UNIT
RM-G3000
REW FF
PAUSE
SET
BLANK
STILL
MODE
AUDIO
MUTING
OUT SEL.
OUT LEV.
REC
F.ADV
MENU
button
–––MENU–––
SYSTEM..
REMOTE. .
AUDIO/VIDEO. .
TIME CODE. .
DISPLAY SET..
CLOCK ADJUST..
FACTORY SETTING CANCEL
DRUM HOUR METER 000200H
EXIT
TOP MENU
Ⅵ To set the unit to the STOP mode:
When operating with the buttons on the main unit, unload the cas-
sette.
1.
Display the TOP MENU.
Main unit
Press the EJECT button for at
least 2 seconds.
Remote controller
Press the MENU button.
Operation
• Display the drum usage time on the DRUM HOUR METER item
of the TOP MENU.
2.
To return to the usual screen:
Main unit
Press the EJECT button.
Remote controller
Press the MENU button.
DRUM HOUR
METER item