Filter
Top Products
44
PLAYBACK
–
Basic playback method
–
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY
PAUSE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
PAUSE
button
STOP
button
PLAY button
REW
button
DV CAM indicator
FF
button
A.DUB
F.REV
INDEX– INDEX+
PLAY
STOP
REMOTE CONTROL UNIT
RM-G3000
REW FF
PAUSE
REC
F.A DV
PLAY button
PAUSE button
REW
button
FF
button
STOP button
DISPLAY
BARS
MENU SEARCH+
SEARCH–
A DUB PAUSE
SET
BLANK
STILL
MODE
AUDIO
MUTING
OUT SEL.
OUT LEV.
REC
STILL MODE button
1.
Load a recorded tape.
¥ The unit is powered on.
2.
Start playback.
Press the PLAY button.
¥Start playback. If the tape is recorded in the DVCAM format,
the DVCAM indicator will light up.
3.
Pause
Press the PAUSE button.
¥A still image is output.
Memo
When output of still image
continues for a prolonged
period, the unit will automati-
cally go into the tape protec-
tion mode. The lapse time
can be selected from the
LONG PAUSE TIME item of
the SYSTEM menu.
Remote controller
Press the STILL MODE button. The still image changes as follows
each time the button is pressed.
4.
Resume playback.
Press the PLAY button.
5.
Stop playback.
Press the STOP button.
Field image 1st Field image 2nd Field image Frame image
ⅥWhen the unit is in the STOP mode, pressing the FF
button will fast-forward the tape.
ⅥWhen the unit is in the STOP mode, pressing the REW
button will rewind the tape.
Fast forward/rewind
Ⅵ To change the still image type
Note
Tapes recorded in the LP
mode cannot be played back.
The monitor will display the
alarm message: "LP TAPE!"
45
PLAYBACK
–
Special playback function
–
Frame advance (reverse) playback
Use the remote controller.
DISPLAY
BARS
MENU SEARCH+
SEARCH–
A.DUB
F. REV
INDEX– INDEX+
PLAY
STOP
REMOTE CONTROL UNIT
RM-G3000
REW FF
PAUSE
SET
BLANK
STILL
MODE
AUDIO
MUTING
OUT SEL.
OUT LEV.
REC
F. ADV
F.REV
button
F.ADV
button
Setting
ⅥThe STL/F. ADV MODE item of the SYSTEM menu
Select the amount of frame advance playback and still image.
FIELD :Image is advanced field by field. (1st /2nd alternate)
1st FIELD :Image is advanced frame by frame and the 1st field
image is displayed.
2nd FIELD:Image is advanced frame by frame, and 2nd field im-
age is displayed.
FRAME :Image is advanced frame by frame, and frame image
is displayed.
Operation
1.
Set the unit to the STILL mode.
2.
Frame advance in the forward direction.
Press the F. ADV button.
When the F. ADV button is held down, the image will advance
continuously in the forward direction.
ⅥFrame reverse in the reverse direction.
Press the F. REV button.
When the F. REV button is held down, the image will reverse con-
tinuously in the reverse direction.
Memo
When pressing the PAUSE
button on the main unit in the
STILL mode, the image is
advanced frame-by-frame.