Filter
Top Products
59
REMOTE menu
The REMOTE menu consists of 2 menus. (1/2 and 2/2 menu)
Ⅵ REMOTE (1/2) menu
Items Setting Contents
REMOTE
LOCAL
FUNCTION
PREROLL
REM FF/REW
MODE
OFF
ⅷON
NO KEY
EJECT
STP + EJT
ⅷALL KEYS
3SEC
5SEC
ⅷ7SEC
10SE
ⅷFF/REW
SEARCH
Use this menu item to enable/disable the REMOTE SEL. switch on
the front panel.
OFF :
Disables the 9 PIN/SERIAL setting of the REMOTE SEL.
switch.
ON :Enables the 9 PIN/SERIAL setting of the REMOTE SEL.
switch. Use this setting when remote controlling the unit via
the 9 PIN and SERIAL terminal.
Use this to select the buttons on the main unit to be rendered oper-
able when remote controlling the unit via the 9 PIN REMOTE ter-
minal or the SERIAL REMOTE terminal.
NO KEY : No button enabled.
EJECT : Only the EJECT button enabled.
STP + EJT : Only the STOP button and the EJECT button are ena-
bled.
ALL KEYS : All operation buttons are enabled.
Memo
If the OPERATION LOCK item of the SYSTEM (2/2) menu is set
as ON, the buttons on the main unit will be disabled regardless of
the setting here.
When remote controlling the unit via the 9 PIN REMOTE terminal,
use this item to set the PREROLL time of the unit. Configurations
done via the editing remote controller prevail over other settings.
3SEC : 3 seconds
5SEC : 5 seconds
7SEC : 7 seconds
10SEC : 10 seconds
Memo
To enhance editing precision, please set it to at least 7 seconds.
Use this menu item to set the action to be performed when an FF/
REW command is received via the 9 PIN REMOTE terminal or DV
terminal.
FF/REW : Sets the unit to execute FF/REW when a command is
received. This is the usual setting.
SEARCH : Sets the unit to go into the SEARCH state when a
command is received. Use this setting if the locate(cue
up) function does not work well.
58
MENU SCREEN
–
Contents of the menus
–
(continued)
SYSTEM Menu
(continued)
Items Setting Contents
INDEX WRITE
REPEAT MODE
NEXT PAGE
PAGE BACK
OFF
ⅷON
ⅷOFF
INDEX
VIDEO OUT
TAPE END
Use this setting to enable/disable index signal recording.
OFF : No recording of index signal.
ON : Use this setting to record index signals. An index signal is
automatically registered at the position where recording
starts.
Use this setting to enable/disable repeat playback.
OFF : No repeat playback
INDEX : Repeat playback between the positions where in-
dex signals are recorded.
VIDEO END : Repeat playback from the beginning of the tape to
the position where recording of video signals ends.
TAPE END : Repeat playback from the beginning to the end of
the tape.
Display the SYSTEM (2/2) menu.
Return to the TOP MENU.
Ⅵ SYSTEM (2/2) menu
Items Setting Contents
DC IN MODE
OPERATION
LOCK
PAGE BACK
ⅷOPE OFF
OPE ON
PLAY
ⅷOFF
ON
Select the action to perform when power is supplied via the DC IN
terminal.
OPE OFF : Sets the unit to OPERATE OFF
OPE ON :Sets the unit to OPERATE ON.
PLAY : If a tape has been inserted, the VTR will go into the
PLAY mode. (AUTO PLAY)
Turn ON/OFF the OPERATION LOCK.
OFF : Turns off the OPERATION LOCK and enables the buttons
on the main unit.
ON : VTR goes into the OPERATE LOCK mode. The buttons and
the slide switch on the main unit are inhibited. However,
OPERATE ON and menu operations are still possible.
Memo
Even when this setting is OFF, disabling the buttons on the main
unit while it is controlled via a remote controller connected to the 9
PIN REMOTE or SERIAL REMOTE terminal is possible, by setting
the LOCAL FUNCTION item of the REMOTE menu.
Return to the SYSTEM (1/2).