Filter
Top Products
24
PREPARATION
–
Provided wireless remote controller
–
LOADING THE BATTERIES
Before using the wireless remote controller, please load 2 batteries (AA) in.
1
Lift up the cover
of the battery
compartment.
2
Load in 2 batteries
(AA).
•Please insert the · pole
in first.
3
Close the cover.
Battery
compartment
cover
+
-
-
+
Memo
Guide on battery replacement.
When the operable distance of the remote
controller is decreased, the batteries have
become exhausted. Please replace them.
Guide for replacement: Approx 3 months
based on average usage of 1000 times a day.
When replacing the batteries
• Please use AA batteries.
• Please use 2 new batteries. (Do not mix new
and old batteries.)
• Please load the batteries correctly accord-
ing to the ª and · signs.
• Please read the precautions printed on the
batteries.
Precautions on the use of battery
• The provided batteries are for confirmation
of operation.
• If the remote controller is not to be used for
a long period of time, please remove the
batteries from the compartment.
• If the remote controller does not work as
expected, please remove the batteries and
reload them after 5 minutes.
Note
If fluid leaks from the battery, please wipe the
battery compartment thoroughly.
If the fluid comes into contact with your body,
please rinse the affected parts with water thor-
oughly.
Gebruikte batterijen:
Niet weggooien,
maar inleveren
als KCA.
For Nederlands only.
Uitsluitend voor Nederlands.
E model only
←
25
USING THE WIRELESS REMOTE CONTROLLER
Maximum distance to the sensor
of the unit : 6m
Angle : within 30˚
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY
PAUSE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
Sensor for the wireless remote controller
Before using the wireless remote controller,
please set the REMOTE SEL. switch to
“WIRELESS”.
Ⅵ Operable scope of the wireless remote controller
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY
PAU SE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
Sensor for the wireless remote controller
About 30˚
About 30˚
Not further than 6m
Notes
• The remote controller will hardly work if there are obstructive objects between the remote control
sensor of the main unit and the remote controller.
• The remote controller will hardly work when sunlight or strong light shines directly on the remote
control sensor of the main unit.
• Do not press the buttons on the main unit and the remote controller simultaneously for this may
cause malfunction.
Caution on using the wireless remote controller
When more than 2 VTRs are being individually operated in the same place, please ensure that the front
panel REMOTE SEL. switches of all VTRs except the one to be manipulated, are NOT set at WIRELESS.