Filter
Top Products
56
MENU SCREEN
–
Contents of the menus
–
In the menu descriptions below, settings with “
ⅷ
” marks are factory settings.
TOP MENU
Items Setting Contents
SYSTEM
REMOTE
AUDIO/VIDEO
TIME CODE
DISPLAY
CLOCK ADJUST
FACTORY
SETTING
DRUM HOUR
METER
EXIT
ⅷCANCEL
EXECUTE
Displays the menus related to the operation system of this unit.
Displays the menus related to the remote controller.
Displays the menus related to the audio and video.
Displays the menu for setting time codes.
Displays the menu related to the displays on the monitor connected
to the VIDEO LINE OUT or Y/C OUT terminal.
Displays the menu for setting date/time.
For information on the setting method, please refer to page 31
“Setting date/time”.
Sets whether to return the values on the menu to those initially set
at manufacture.
CANCEL : Do not use the factory settings
EXECUTE : Use the factory settings
Displays the drum usage time.
*The cursor cannot be moved to this item.
Return to the usual screen.
57
SYSTEM Menu
The SYSTEM menu consists of the following 2 screens. (1/2 and 2/2 menu)
Ⅵ SYSTEM (1/2) menu
Items Setting Contents
STL/F.ADV
MODE
BACKUP REC
TIME
LONG PAUSE
TIME
LONG PAUSE
TIME
FIELD
1st
ⅷ2nd
FRAME
ⅷOFF
25MIN
55MIN
75MIN
115MIN
175MIN
265MIN
30SEC
1MIN
2MIN
3MIN
ⅷ5MIN
ⅷF.ADV
STBY-OFF
Use this item to select the still image type during the STILL mode
or frame advance playback.
FIELD : Displays field image. During frame advance playback,
1st and 2nd field images are displayed alternately.
1st : displays the 1st field image.
2nd : displays the 2nd field image.
FRAME : displays the frame image.
Memo
The image type for the STILL mode can also be selected with the
STILL MODE button on the wireless remote controller.
Set this item according to the recording time of the source tape
during DV signal input backup recording.
OFF :No backup recording.
25MIN : Use this setting if the recording time of the source tape
is 30 mins
55MIN : Use this setting if the recording time of the source tape
is 60 mins
75MIN : Use this setting if the recording time of the source tape
is 80 mins
115MIN : Use this setting if the recording time of the source tape
is 120 mins
175MIN : Use this setting if the recording time of the source tape
is 180 mins
265MIN : Use this setting if the recording time of the source tape
is 270 mins
☞
Page 40 “Backup recording function”
Sets the interval after the lapse of which the tape protection mode
will be engaged during an extended STILL mode, STOP mode or
recording pause. The setting for the STILL mode can be made via
the LONG PAUSE MODE menu item.
30SEC: 30 seconds
1MIN : 1 minute 3MIN : 3 minutes
2MIN : 2 minutes 5MIN : 5 minutes
Memo
To prevent damage, please set as short a time interval as possi-
ble.
Use this menu item to set the action to be done when the unit has
been left in the STILL mode for an extended period of time. In the
case that the unit had been left in the recording pause or STOP
mode, the unit will go into the Standby Off mode.
F.ADV: It advances in the forward direction. On the 6th advance-
ment, it goes into the STOP state.
STBY-OFF: Goes into the STOP state.