Turning off the power
Ⅵ Stop all operational activities of the
unit.
1.
Press the OPERATE button on the unit
or the remote controller.
• The unit will enter the OPERATE OFF mode
and the OPERATE indicator will light up red.
2.
If the unit is not to be used for a long
period of time, please unplug the AC
adapter.
•To disconnect the AC adapter, please unplug
the power cord from the socket first.
Ⅵ When the unit is in the OPERATE OFF
mode (the OPERATE indicator lights
up red), press the OPERATE button on
the unit or the remote controller.
• The power is turned on and the OPERATE in-
dicator lights up green. The unit is now ready
for operation. (OPERATE ON mode)
Memo
• Once a cassette has been loaded in the OP-
ERATE OFF mode, power will be turned on
and the OPERATE ON mode will be engaged.
• The remote controller is only effective when
the REMOTE SEL. switch is set to WIRELESS.
1.
Connect the DC cord of the AC adapter
to the DC IN terminal of the main unit.
2.
To prevent accidental disconnection of
the DC cord, fasten the DC cord with a
clamp.
1Remove 1 screw followed by the clamp.
2Insert the DC cord into the clamp and fasten
the clamp unto the main unit.
3.
Connect the provided power cord to the
AC IN terminal of the AC adapter.
4.
Connect the power cord to the power
socket.
•Power is channeled into the unit and the OP-
ERATE indicator lights up red (OPERATE
OFF mode).
• If the DC IN MODE item of the SYSTEM (2/
2) menu is set to OPE ON or PLAY, the OP-
ERATE indicator will light up green (OPER-
ATE ON mode). If it is set to PLAY, the VTR
will automatically start to play the loaded tape.
Memo
•Even in the OPERATE OFF mode, a small
amount of electricity will still flow into the unit.
• When the unit is in the OPERATE OFF
mode, no operation can be performed ex-
cept that of the OPERATE buttons(on the
main unit and the remote controller) and
cassette loading/ejecting.
Notes
• Please supply power to the unit via the provided AC adapter. Do
not use other power sources.
• During recording or playback, please do not unplug the DC or
power cord.
• When the supply voltage is low, the “LOW VOLTAGE” alarm mes-
sage will be displayed.
☞
Page 66
LOW VOLTAGE
Alarm message
Connecting to the AC adapter
