Filter
Top Products
40
RECORDING
–
Backup recording function
–
By linking this unit to other DV devices, this unit can perform continuous, long-hour recording.
This unit can be set as a backup unit connected to a DV camcorder (GY-DV300/DV500/DV550/
DV5000, etc.). When the recording tape of the source unit ends, this unit can start recording.
This enables long-hour recording.
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY
PAU SE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
INPUT SEL. switch
Backup unit: the main unit
LIGHT
ON
OFF
COUNTER
CTL
TC
UB
RESET
OPERATE/WARNING
MONITOR
SELECT
STATUSSHUTTER
MENU
FILTER
1 3200k
2 5600k
3 5600k+ND
POWER
NG
GAIN
OUTPUT
WHT.BAL
VTR
ON OFF
ALARM
MONITOR
S
A
V
E
S
T
B
Y
H
M
L
B
A
R
S
C
A
M
A
U
T
O
K
N
E
E
P
R
S
T
A
B
O
N
O
F
F
CH-1
CH-2
AUDIO
LEVEL
AUTO IRIS LOLUX
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK
DV cable
DV terminal DV terminal
Memo
• Backup recording records the video and sound
from the source unit to the main unit. While this
unit is performing backup recording, please
continue shooting from the source unit.
• The audio mode is the mode configured in the
source unit. (32k/48k)
• Please set the BACKUP REC TIME item to OFF
if the unit is not performing backup recording.
Connection
Connect the DV terminal of the source unit to the
DV terminal of this unit with a DV cable.
Setting up this unit
ⅥSet the INPUT SEL. switch on the front
panel to DV.
ⅥSet the BACKUP REC TIME item of the
SYSTEM (1/2) menu.
Use the following settings according to the length
of the tape of the source unit.
For DV or mini DV cassettes:
25MIN : 30-minute tape
55MIN : 60-minute tape
75MIN : 80-minute tape
115MIN : 120-minute tape
175MIN :180-minute tape
265MIN : 270-minute tape
OFF : No backup recording
ⅥSet the TC DUPLICATE item of the TIME
CODE menu to OFF.
• It records the data of the built-in time code
generator or the built-in clock.
• When the TC DUPLICATE menu item is set to
AUTO or NON DROP, the time code of the DV
camcorder will stop advancing. If the DV cable
is disconnected, the time code of the backup
recording will stop advancing.
Operation
1.
Recording begins on the source unit.
* Please record from the beginning of the re-
cording tape.
2.
This unit begins recording when the
tape of the source unit is near the end
(about 5 minutes before the end of the
tape).
• This unit begins recording when the record-
ing time of the source unit reaches the time
configured by the BACKUP REC TIME set-
ting.
41
RECORDING
–
Recording using the serial remote terminal
–
Recording can be turned ON/OFF with the serial remote controller or the footswitch connected
to the SERIAL REMOTE terminal on the rear panel.
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY
PAU SE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
DV IN/OUT
AUDIO VIDEO
LINE
Y/C
CH 1/3 CH 2/4
INOUT
REMOTE
SERIAL
9PIN
NTSC/PAL
NTSC PAL
DC12V
REMOTE SEL. switch
SERIAL REMOTE terminal
• Serial remote controller: RM-G30
• Footswitch
–––REMOTE[1/2]–––
REMOTE ON
LOCAL FUNCTION ALL KEYS
PREROLL 5S
REM FF/RE
WMODE FF/REW
REM STOP SEL EE
PB START DELAY OF
SYNCHRONIZATION ON
NEXT PAGE
PAGE BACK
–––REMOTE[2/2]–––
CONTROLLER SEL TYPE1
FOOT S
WOFF
PAGE BACK
REMOTE (1/2) menu
REMOTE (2/2) menu
Memo
• The serial remote control-
ler can perform operations
other than recording.
• The buttons on the unit to
be rendered operable can
be set via the LOCAL
FUNCTION item of the RE-
MOTE(1/2) menu.
Connection
Connect the serial remote controller (available separately: RM-G30)
or the footswitch to the SERIAL REMOTE terminal on the rear panel.
Setting
ⅥSet the REMOTE SEL. switch on the front panel to SE-
RIAL.
ⅥSet the REMOTE item of the REMOTE (1/2) menu to
ON.
ⅥSet the FOOT SW item of the REMOTE (2/2) menu ac-
cording to the way in which the serial remote terminal
is used.
OFF : Set to OFF when the serial remote controller is used.
The footswitch cannot be used.
L EDGE :Recording and recording pause operations are
switched at the LOW edge of the footswitch signal.
H EDGE : Recording and recording pause operations are
switched at the HIGH edge of the footswitch signal.
L LEVEL :Record at the LOW edge and pause recording at the
HIGH edge of the footswitch signal.
Operation
Before using the footswitch, first engage the recording or recording
pause mode via the buttons on the main unit.
Memo
• The footswitch can only be used for switching the recording
operation ON/OFF.
• The footswitch functions irrespectively of the REMOTE SEL
switch settings.