Filter
Top Products
31
PREPARATION
–
Setting/displaying date and time
–
This function sets up the date and time data of the built-in clock. With the built-in chargeable
battery, the configured date and time data is maintained even after the main power is turned
off. The data will be displayed on the monitor according to the menu setting. During tape
recording, the time and date data is registered.
SET
MENIU
EJECT
REC PLAY
PAUSE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
1.
Eject button
2.
–
2
PAUSE/FF
button
2.
–
1
PLAY/STOP
button
DISPLAY
BARS
MENU SEARCH+
SEARCH–
SET
BLANK
STILL
MODE
AUDIO
MUTING
OUT SEL.
OUT LEV.
2.
–1 button
1.
Menu
button
2.
–2 button
2.
–1 button
2.
–2 SET
button
–––MENU–––
SYSTEM..
REMOTE. .
AUDIO/VIDEO. .
TIME CODE..
DISPLAY SET..
CLOCK ADJUST..
FACTORY SETTING CANCEL
DRUM HOUR METER 000000
EXIT
–––CLOCK ADJUST–––
DATE (DD/MM/YY) 10/10/02
TIME 00:00:00
PAGE BACK
TOP MENU Cursor
CLOCK ADJUST menu
Setting the date and time
The date and time data is set up via the CLOCK ADJUST menu.
Setting can be performed while viewing the monitor screen
connected to the VIDEO LINE OUT or Y/C OUT terminal.
• The date and time can be set up using either the remote
controller or the unit.
Ⅵ Press the OPERATE button on the unit or the remote
controller to turn on the power and enter the STOP mode.
* When setting it using the main unit, eject the loaded cassette, if
any.
1.
Displaying the TOP MENU.
Main unit
Press the EJECT button for at
least 2 seconds.
Remote controller
Press the MENU button.
2.
Displaying the CLOCK ADJUST menu.
Remote controller
1
Press the
ᮡ
or
ᮢ
button
and bring the cursor to the
CLOCK ADJUST item.
2
Press the SET or
ᮣ
button.
Main unit
1
Press the PLAY or STOP
button and bring the cursor
to the CLOCK ADJUST
item.
2
Press the PAUSE or FF
button.
30
PREPARATION
–
Loading/ejecting cassettes
–
Please use standard DV cassettes or mini DV cassettes.
Loading the cassette
1.
Check the cassette.
• Set the rear slide.
Push it to “REC” for recording or “SAVE” to prevent its contents
from being erased accidentally.
• Check that the tape is not slackened.
Use an object, such as a clip, to turn the reel in the direction of
the arrow. If the tape is taut, the reel will not rotate.
2.
Check that the cassette indicator on the unit is unlit.
When a cassette is loaded, the cassette indicator will lit up.
3.
Load the cassette.
•For the standard DV cassette, just align it with the cassette slot
and insert.
•
For the mini DV cassette, load it in between the left and right guides.
Set the tape, window face up, and push the cassette in slowly
until it is drawn in automatically.
¥
While the cassette is being loaded, the cassette indicator blinks.
The indicator lights up when cassette loading is complete.
Standard DV cassettes
Mini DV cassettes
Guide
REC
SAVE
Slide
Clip
Reel
SET
MENIU
EJECT
REC PLAY
PAUSE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
INPUT SEL.
LINE
DV
Y/C
Cassette indicator
EJECT button
Ejecting the cassette
1.
Press the EJECT button on the unit.
¥
Ejection begins. During ejection, the cassette indicator blinks.
2.
Eject the cassette.
Memo
•
The cassette can be loaded/
ejected even when the unit is
in the OPERATE OFF mode.
•
The loading/ejection process
takes about 6 seconds.
•
Ejection cannot be done with
the wireless remote controller.