Filter
Top Products
47
PLAYBACK
–
Locate function
–
Index search
This function locates and advances/rewinds to the position where the index signal is recorded.
Use the remote controller.
ⅥTo locate an index in the forward direction vis-a-vis the
current tape position:
• Press the INDEX + button.
The index position to be located can be specified by the number
of times this button is pressed. (Max: 99)
ⅥTo locate an index in the reverse direction vis-a-vis the
current tape position:
• Press the INDEX - button.
The index position to be located can be specified by the number
of times this button is pressed. (Max: 99)
ⅥWhen the INDEX + or INDEX - button is pressed, the unit
will fast-forward or rewind to the specified indexed po-
sition and start playing.
A.DUB
F. REV
INDEX– INDEX+
PLAY
STOP
REMOTE CONTROL UNIT
RM-G3000
REW FF
PAUSE
REC
F. ADV
INDEX –
button
INDEX +
button
Blank search
This function locates the unrecorded parts of the tape. Use the remote controller.
INDEX+1
During index search, this message
is displayed on the monitor
(the number represents the position of
the index).
DISPLAY
BARS
MENU SEARCH+
BLANK
STILL
MODE
AUDIO
MUTING
OUT SEL.
BLANK button
BLANK SEARCH
Monitor screen
Memo
•
If the interval between index signals is less than 1 minute, the function may
not work well.
•
The specifications for index signal recording varies with the device used.
Monitor screen
ⅥIn the STOP mode, press the BLANK button.
¥ • If the current position is at a recorded part of the tape, the unit
fast-forwards until an unrecorded part is reached and goes into
the STOP mode.
• If the current position of the tape is unrecorded, the unit will
first advance the tape in the forward direction for confirmation
and thereafter rewind and go into the STILL mode at the last
recorded position.
• During a blank search, “BLANK SEARCH” is displayed on the
monitor.
46
PLAYBACK
–
Special playback
–
(continued)
Variable speed playback
Use the remote controller.
Set the unit to the search mode.
The main unit button can also be used to set the unit to the
search mode.
1.
Set the unit to the PLAYBACK or the STILL mode.
2.
Press the FF button to execute fast-forward playback.
Press the REW button to execute reverse playback.
ⅥThe search speed changes according to the following
sequence each time the FF or REW button is pressed:
X20¥X5¥X9¥X20
In DVCAM mode, the maximum speed is 15X.
Changing the speed of fast-forward playback or re-
verse playback:
ⅥDuring normal playback or forward search:
If the SEARCH + (
ᮡ
) buttons are pressed, the playback speed in-
creases.
If the SEARCH – (
ᮢ
) buttons are pressed, the playback speed de-
creases.
ⅥDuring reverse playback or reverse search:
If the SEARCH + (
ᮡ
) buttons are pressed, the playback speed de-
creases.
If the SEARCH – (
ᮢ
) buttons are pressed, the playback speed in-
creases.
The variable playback speed changes as follows in the forward and
reverse direction.
0¥0.1¥0.33¥0.5¥1¥2¥5¥9¥20X speed
(Still)
* 0.1 X speed indicates step slow playback (continuous frame advance).
ⅥDuring the STILL mode:
If the SEARCH + (
ᮡ
) buttons are pressed, the tape will play in the
forward direction.
If the SEARCH – (
ᮢ
) buttons are pressed, the tape will play in the
reverse direction.
Changing the direction of playback
ⅥTo change from normal or fast-forward playback to re-
verse playback:
• Press the
p
(
ᮤ
) button.
If this button is pressed during playback, reverse playback will be
engaged.
ⅥTo change from reverse or rewind playback to forward
playback:
• Press the
P
(
ᮣ
) button.
If this button is pressed during reverse playback, normal playback
will be engaged.
If this button is pressed during rewind playback, fast-forward play-
back will be engaged.
DISPLAY
BARS
MENU SEARCH+
SEARCH–
A.DUB
F. REV
INDEX– INDEX+
PLAY
STOP
REMOTE CONTROL UNIT
RM-G3000
REW FF
PAUSE
SET
BLANK
STILL
MODE
AUDIO
MUTING
OUT SEL.
OUT LEV.
REC
F. ADV
SEARCH – /( )
button
( )
button
REW
button
FF
button
( )
button
SEARCH +/( )
button
Memo
• The A. OUT AT SEARCH
item of the AUDIO/VIDEO
menu can be set to turn on/
off audio output during the
search mode.
• If 0.1 X speed playback (step
slow) has been continued for
about 40 seconds, the unit
will automatically change to
the 0.2 X speed playback
(linear slow) in order to pro-
tect the tape.