44
Some of the latest vehicle models may support two types of I/M Readiness
tests:
A. Since DTCs Cleared - indicates status of the monitors since the DTCs were
erased.
B. This Drive Cycle - indicates status of monitors since the beginning of the
current drive cycle.
An I/M Readiness Status result of “INC” does not necessarily indicate that
the vehicle being tested will fail the state I/M inspection. For some states, one
or more such monitors may be allowed to be “Not Ready” to pass the
emissions inspection.
-“OK” -- Indicates that a particular monitor being checked has completed
its diagnostic testing.
- “INC” -- Indicates that the testing of a particular monitor being tested is
incomplete. Additional driving is needed.
- “N/A” -- The monitor is not supported on that vehicle.
1)Use the UP/DOWN scroll button to select I/M Readiness from the Diagnostic
Menu and press ENTER.
2)Wait a few seconds while the scan tool validates the PID MAP.
3)If the vehicle supports both types of tests, then both types will be shown on the
screen for selection.
...........Diagnostic Menu....... .....
2
System Status
Read Codes
Erase Codes
Live Data ?
View Freeze Frame
I/M Readiness
