Autel AL510 Manual

A SERVICE OF

next previous

35

• If you wish to proceed with overwriting the old recording(s), press

ENTER; if you do not wish to overwrite it, use the LEFT/RIGHT button to

select NO or press ESC to pick another memory location.

5)Observe on-screen instructions.

• If Manual Trigger is selected, the following screen shows:

• If DTC Trigger is selected, the following screen shows:

6)Wait for DTC to trigger recording or press ENTER to start recording.

• Drive until a DTC is detected when DTC Trigger is selected. If no DTCs

are detected, press ESC to exit recording.

Select Memory

A previous recording

exists! Do you want

to overwrite it?

YES NO

Select Memory

……………Manual Trigger……………...

Ready to record!

Press [ENTER] to

start recording

Press [ESC] to exit

………………….DTC Trigger……………..

Waiting for DTC to

trigger recording…

Press [ESC] to exit